Working geometry
The reversible design provides another edge when the working edge wears.
Tigra 013260 – Square Reversible Knife – 14 × 14 × 2 mm
CA$6.23
In stock
SKU
013260
Tigra 013260 – Square Reversible Knife – 14 × 14 × 2 mm is available to buy in increments of 10
Product Class
Knife
Product Type
Square Reversible Knife
Manufacturer Part Number
013260
Knife Length (L)
14 mm
Knife Width (W)
14 mm
Knife Thickness (T)
2 mm
Tool Material
carbide
Carbide Grade
T04F-CR
Cutting Edge Angle (degrees)
30
Cutting Edges
4
Edge / Groove Geometry
straight cutting edges, sharp corners
Square Reversible Knife
Tigra
013260
Designed to renew the cutting edge in a compatible cutter.
14 mmKnife Length (L)
14 mmKnife Width (W)
2 mmKnife Thickness (T)
013260SKU
Square Reversible Knife
Carbide cutting edges provide a hard, wear-resistant working surface.
KnifeSKU 013260
Match the knife profile, seat and fastening arrangement to the cutterhead.
Main Product Description
This Tigra square reversible knife is designed to renew the cutting edge in a compatible cutter.
The reversible design provides another edge when the working edge wears. Keep the seat clean and use the correct orientation and fastening procedure for the cutterhead. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 14 mm long, 14 mm wide and 2 mm thick.
Technical Specifications
013260 · Square Reversible Knife
- Tigra
- 013260
- Knife
- Square Reversible Knife
- Tigra knife and insert components
- 013260
- 14 mm
- 14 mm
- 2 mm
- carbide
- T04F-CR
- 30
- 4
- straight cutting edges, sharp corners
Component Configuration
woodworking with a matching knife carrier
Product Highlights
Cutting material
Carbide cutting edges provide a hard, wear-resistant working surface.
This version
The knife is 14 mm long, 14 mm wide and 2 mm thick.
Compatibility & Installation Notes
Match the original part number, pocket geometry and mounting details. Use the cutterhead manufacturer’s fastening and operating instructions.
Square Reversible Knife
Tigra 013260 is designed to renew the cutting edge in a compatible cutter.
The reversible design provides another edge when the working edge wears. Keep the seat clean and use the correct orientation and fastening procedure for the cutterhead. Carbide cutting edges provide a hard, wear-resistant working surface.
The knife is 14 mm long, 14 mm wide and 2 mm thick. Match the knife profile, seat and fastening arrangement to the cutterhead.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.