4-Flute Compression Geometry
Four-flute compression geometry is intended for laminated or veneered wood and wood composites where finish quality matters on both panel faces.
Royce Ayr 4 Flute Compression Router Bit – 1/2 Diameter – 1 Cut – .400 UPCUT – 1/2 Shank – 3 Overall Length
CA$279.90
Out of stock
SKU
R60-51701
Product Type
4-Flute Compression Router Bit
Series
4 Flute Compression
Cutting Diameter
1/2 in (12.70 mm)
Cutting Edge
1 in (25.40 mm)
Upcut Length
0.400 in (10.16 mm)
Shank
1/2 in (12.70 mm)
Overall Length
3 in (76.20 mm)
Flutes
4
Cutting Material
Solid Carbide
Geometry
Compression / Upcut + Downcut Shear
Materials
Laminated / Veneered Wood &Wood Composites
Application
CNC Routing / Clean Faces / Chip-Free Dados
4-Flute Compression
Router Bit
4 Flute Compression
Solid-carbide four-flute compression router bit for CNC routing laminated or veneered wood and wood composites where top and bottom finish are critical. The verified R60-51701 configuration combines a 1/2-inch cutting diameter, 1-inch cutting edge, 0.400-inch upcut section, 1/2-inch shank, and 3-inch overall length. Royce Ayr specifies that the short upcut allows a chip-free dado to be routed.
D=1/2 in12.70 mm Diameter
CE=1 in25.40 mm Cutting Edge
UPCUT=0.400 in10.16 mm Upcut Length
OAL=3 in76.20 mm Overall Length
4 Flute Compression
Four-flute solid-carbide compression geometry for clean routing through laminated or veneered panels and wood composites. Opposing cutting action supports finish quality on both faces while the short upcut supports chip-free dado work.
Solid Carbide4 FlutesCompressionSKU R60-51701
Designed for compatible CNC routing equipment using a precision 1/2-inch toolholding interface. The page preserves the exact published dimensions and does not add unverified rotation or coating data.
Main Product Description
The Royce Ayr R60-51701 is a four-flute compression router bit within Royce Ayr's Precision CNC Tooling range. Manufacturer catalogue data specifies this family for laminated or veneered wood and wood composites where top and bottom finish are critical.
The exact published configuration is a 0.500-inch cutting diameter, 1.000-inch cutting edge, 0.400-inch upcut length, 0.500-inch shank, and a 3.000-inch overall length. Royce Ayr specifically notes that the short upcut allows a chip-free dado to be routed while preserving finish on the panel faces.
The exact accessible SKU row does not publish rotation or coating, so those fields are intentionally omitted rather than inferred from neighboring tools. Verify toolholder fit, runout, tool projection, spindle speed, feed rate, pass depth, entry strategy, workholding, and extraction for the actual laminated, veneered, or wood-composite panel.
Technical Specifications
4 Flute Compression R60-51701
- Royce Ayr
- 4-Flute Compression Router Bit
- R60-51701
- 4 Flute Compression
- Solid Carbide
- 0.500 in / 1/2 in (12.70 mm)
- 1.000 in / 1 in (25.40 mm)
- 0.400 in (10.16 mm)
- 0.500 in / 1/2 in (12.70 mm)
- 3.000 in / 3 in (76.20 mm)
- 4
- Compression / Upcut + Downcut Shear
- Material Compatibility: Laminated or Veneered Wood and Wood Composites · Verified Cut Behavior: Short Upcut Allows Chip-Free Dado Routing · Machine Type: CNC Router / Compatible Routing Equipment
- Designed for compatible CNC routing equipment using a precision 1/2-inch toolholding interface. The page preserves the exact published dimensions and does not add unverified rotation or coating data.
Best Fit Applications
Laminated Panel Routing
Veneered Panel Routing
Wood Composite Routing
Clean Top & Bottom Edges
Chip-Free Dado Routing
Product Highlights
0.400-Inch Upcut Section
Royce Ayr specifies the 0.400-inch upcut section within the exact R60-51701 geometry, paired with a 1-inch cutting edge.
Compact 3-Inch OAL
The 1/2-inch cutting diameter and matching 1/2-inch shank are packaged in a compact 3-inch overall length for CNC panel-routing work.
Compatibility & Installation Notes
Confirm that the CNC router toolholder accepts the exact 1/2-inch (12.70 mm) shank and provides suitable clearance for the 3-inch overall tool length. Inspect the collet and nut, minimize unsupported projection, verify runout, secure the workpiece, and establish spindle speed, feed rate, pass depth, entry strategy, and extraction for the actual laminated, veneered, or wood-composite panel. Confirm rotation and coating from the physical tool or current Royce Ayr documentation before installation because those fields were not present in the exact accessible SKU row used here.
Compression Routing for Clean Panel Faces
Royce Ayr R60-51701 combines a 1/2-inch cutting diameter, 1-inch cutting edge, 0.400-inch upcut section, 1/2-inch shank, four-flute compression geometry, and a 3-inch overall length.
Its compression geometry is intended for laminated or veneered wood and wood composites where both faces must remain clean, while the short upcut supports chip-free dado routing.