Royce Ayr Ultimax Triple-Flute Compression CNC Router Bit 1/2 in (12.7 mm)
3-Flute Ultimax Compression
Router Bit
Ultimax-coated triple-flute compression router bit for laminated or veneered wood and wood composites where top and bottom finish is critical. Its 1/2-inch cutting diameter, 1-5/8-inch cutting edge, 0.380-inch upcut section, 1/2-inch shank, and 3-1/2-inch overall length provide extended cutting reach for compatible CNC panel-routing operations.
Main Product Description
The Royce Ayr 3-Flute Ultimax Compression Router Bit R60-11503UM belongs to Royce Ayr's Triple Flute Compression series. It is intended for routing laminated or veneered wood and wood composites when finished top and bottom edges are important.
Its compression geometry combines upward and downward cutting action to prevent chipping on laminated faces. The 0.380-inch (9.652 mm) upcut section supports compatible dado-routing operations when the cutting depth and entry strategy position the compression transition correctly within the workpiece.
Royce Ayr specifies Ultimax coating for reduced friction, increased edge hardness, strong coating adhesion, and extended tool life in nested-routing applications. Before machining, verify toolholding, runout, right-hand rotation, tool projection, spindle speed, feed rate, pass depth, workholding, and chip extraction.
Best Fit Applications
Product Highlights
Ultimax Coating
Royce Ayr specifies the coating for reduced friction, increased edge hardness, strong adhesion, and extended tool life in nested routing.
Extended Cutting Reach
The 1-5/8-inch cutting edge and 3-1/2-inch overall length provide added reach for compatible CNC panel-routing operations.
Triple-Flute Compression
The three-flute compression geometry provides a production-focused option where controlled top and bottom edge finish is required.
Compatibility & Installation Notes
Confirm that the CNC router spindle or toolholder accepts an exact 1/2-inch (12.7 mm) shank and provides sufficient clearance for the 3-1/2-inch (88.9 mm) overall length. Inspect the collet and nut, minimize unsupported projection, verify right-hand rotation and runout, and establish suitable spindle speed, feed rate, pass depth, workholding, and chip extraction. Position the 0.380-inch (9.652 mm) upcut section and compression transition correctly within the material.
Extend Finish-Critical Panel Routing
The Royce Ayr 3-Flute Ultimax Compression Router Bit R60-11503UM provides an Ultimax-coated solid-carbide solution for laminated, veneered, and wood-composite panel routing where top and bottom finish is critical.
Its 1/2-inch diameter and shank, 1-5/8-inch cutting edge, 0.380-inch upcut section, triple-flute compression geometry, Ultimax coating, and 3-1/2-inch overall length suit compatible CNC systems when correctly held and operated.