Royce Ayr 3 Flute Upcut High Helix Ripper — D 1/2 in · CE 2 in · Sh 1/2 in · OA 4 in. Exact production data is tied to SKU R60-01711; stale legacy/private-label wording has been replaced where current Royce Ayr or verified catalogue data provides a stronger source.
1/2 inCutting Diameter
2 inCutting Edge
1/2 inShank
4 inOverall Length
Tool Type
3 Flute Upcut High Helix Ripper
Verified Royce Ayr configuration for industrial woodworking, CNC routing, boring, panel processing, or tooling service as applicable to this exact SKU.
HW / Carbide3 FluteRH / Right HandSKU R60-01711
System Fit
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use.
Main Product Description
The Royce Ayr 3 Flute Upcut High Helix Ripper R60-01711 is configured for production CNC routing with cutting diameter 1/2 in, cutting edge 2 in, shank 1/2 in, overall length 4 in.
The verified 3 flute upcut high helix ripper geometry and 3-flute cutting configuration are matched to solid wood, mdf, plywood, wood composites and compatible plastics. The geometry is intended to balance chip formation, edge quality and tool rigidity in the stated application family.
Maintain clean, concentric toolholding and minimize unsupported projection. Establish spindle speed, feed rate and depth-per-pass for the workpiece, machine power, workholding and tool diameter rather than transferring settings from a different cutter.
Technical Specifications
3 Flute Upcut High Helix Ripper · R60-01711
BrandRoyce Ayr
Product Type3 Flute Upcut High Helix Ripper
SKUR60-01711
Family / Series3 Flute Upcut High Helix Ripper
Cutting MaterialSolid Carbide
Cutting Diameter1/2 in
Cutting Edge2 in
Shank / Interface1/2 in
Overall Length4 in
Flute / Edge Count3
RotationRH / Right Hand
Geometry3 Flute Upcut High Helix Ripper
Additional Verified DetailsCoating: Uncoated / Standard · Material Compatibility: Solid Wood, MDF, Plywood, Wood Composites and Compatible Plastics
Machine / System FitDesigned for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use.
Application Matrix
Best Fit Applications
Solid Wood Routing
MDF & Composite Panels
Grooving & Slotting
CNC Profiling
Cabinet Component Production
Performance Details
Product Highlights
01
Upcut Chip Evacuation
The verified upcut geometry directs chips away from the cut during routing and slotting operations.
02
Solid-Carbide Construction
Solid-carbide cutting construction supports edge retention and dimensional control in production routing.
03
Exact SKU Geometry
The published diameter, cutting length, shank, flute count and overall length are preserved for this exact tool.
Before Machining
Compatibility & Installation Notes
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use. Confirm exact dimensions, rotation, cutting geometry, coating designation and compatible machine/tool body before installation. Do not substitute an adjacent Royce Ayr row merely because one or more dimensions appear similar.
Production Outcome
Build Repeatable Production Accuracy
The Royce Ayr 3 Flute Upcut High Helix Ripper R60-01711 preserves the verified identity and production geometry required for accurate tooling selection. D 1/2 in · CE 2 in · Sh 1/2 in · OA 4 in.
Use the exact verified SKU and setup data, inspect the tooling and holder before production, and establish operating parameters for the actual machine, workpiece and workholding conditions.
