Upcut Chip Evacuation
The verified upcut geometry directs chips away from the cut during routing and slotting operations.
Royce Ayr 2 Flute Upcut Spiral — D 1/2" – Cut 2-1/2" – Shank 1/2" – Overall Length 5"
CA$999.99
Out of stock
SKU
R52-32832
Product Type
2 Flute Upcut Spiral
Series / Family
2 Flute Upcut Spiral
Diameter
1/2 in
Cutting Edge
2-1/2 in
Shank
1/2 in
Overall Length
5 in
Cutting Edges
2
Rotation
RH / Right Hand
Cutting Material
Solid Carbide
2 Flute Upcut Spiral
Royce Ayr
Industrial CNC Tooling
Royce Ayr 2 Flute Upcut Spiral — D 1/2 in · CE 2-1/2 in · Sh 1/2 in · OA 5 in. Exact production data is tied to SKU R52-32832; stale legacy/private-label wording has been replaced where current Royce Ayr or verified catalogue data provides a stronger source.
1/2 inCutting Diameter
2-1/2 inCutting Edge
1/2 inShank
5 inOverall Length
2 Flute Upcut Spiral
Verified Royce Ayr configuration for industrial woodworking, CNC routing, boring, panel processing, or tooling service as applicable to this exact SKU.
HW / Carbide2 FluteRH / Right HandSKU R52-32832
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use.
Main Product Description
The Royce Ayr 2 Flute Upcut Spiral R52-32832 is configured for production CNC routing with cutting diameter 1/2 in, cutting edge 2-1/2 in, shank 1/2 in, overall length 5 in.
The verified 2 flute upcut spiral geometry and 2-flute cutting configuration are matched to phenolic and reinforced composite materials. The geometry is intended to balance chip formation, edge quality and tool rigidity in the stated application family.
Maintain clean, concentric toolholding and minimize unsupported projection. Establish spindle speed, feed rate and depth-per-pass for the workpiece, machine power, workholding and tool diameter rather than transferring settings from a different cutter.
Technical Specifications
2 Flute Upcut Spiral · R52-32832
- Royce Ayr
- 2 Flute Upcut Spiral
- R52-32832
- 2 Flute Upcut Spiral
- Solid Carbide
- 1/2 in
- 2-1/2 in
- 1/2 in
- 5 in
- 2
- RH / Right Hand
- 2 Flute Upcut Spiral
- Coating: Uncoated / Standard · Material Compatibility: Phenolic and Reinforced Composite Materials
- Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use.
Best Fit Applications
Hard Plastic Routing
Plastic Sheet Profiling
Slotting & Pocketing
CNC Contour Cutting
Edge Finishing
Product Highlights
Solid-Carbide Construction
Solid-carbide cutting construction supports edge retention and dimensional control in production routing.
Exact SKU Geometry
The published diameter, cutting length, shank, flute count and overall length are preserved for this exact tool.
Compatibility & Installation Notes
Designed for compatible CNC routers and production toolholding systems accepting the exact 1/2 in shank. Verify collet condition, projection, rotation and machine limits before use. Confirm exact dimensions, rotation, cutting geometry, coating designation and compatible machine/tool body before installation. Do not substitute an adjacent Royce Ayr row merely because one or more dimensions appear similar.
Build Repeatable Production Accuracy
The Royce Ayr 2 Flute Upcut Spiral R52-32832 preserves the verified identity and production geometry required for accurate tooling selection. D 1/2 in · CE 2-1/2 in · Sh 1/2 in · OA 5 in.
Use the exact verified SKU and setup data, inspect the tooling and holder before production, and establish operating parameters for the actual machine, workpiece and workholding conditions.