30 mm Special Size
ER40-30 is the 30 mm nominal tool-shank ER40 variant in Titan inventory; exact special-envelope dimensions are not claimed without verification.
Royce Ayr ER40 Precision Collet – 30mm Tool Shank – DIN 6388
CA$999.99
Out of stock
SKU
ER40-30
Product Type
Precision ER40 ER Collet
Collet Series
ER40
Nominal Tool Shank
1.1811 in (30 mm)
Standard
DIN 6388
Family Envelope
Special 30 mm variant — standard ER40 OAL/OD not assigned
Machine Type
CNC Router
Installation
Snap collet into nut before threading nut onto tool holder
Precision ER40
Collet
Precision ER40 Collet
Royce Ayr ER40-30 is a 30 mm precision ER40 collet for securely clamping compatible round tool shanks in ER40 toolholding systems. Royce states its collets conform to DIN 6388; this 30 mm size is treated as a special variant and standard ER40 envelope dimensions are not assigned without exact verification.
30 mmNominal Tool Shank
ER40Collet Series
Special SizeEnvelope Not Assumed
DIN 6388Collet Standard
Precision ER40 Collet
30 mm nominal tool-shank collet for compatible ER40 holders and nuts. This 30 mm size is treated conservatively as a special variant.
ER40DIN 638830 mmSKU ER40-30
Compatible ER40 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Main Product Description
The Royce Ayr ER40-30 is a precision ER40 collet sized for a 30 mm round tool shank. It is intended for compatible CNC-router toolholders and collet nuts using the ER40 system.
Royce states its collets conform to DIN 6388. The standard ER40 family identification envelope is 46 mm overall length by 41 mm outside diameter; however, 30 mm ER40 collets can use special/non-standard geometry, so those standard envelope dimensions are not assigned to this exact SKU.
For installation, snap the collet into the nut first, then thread the nut onto the tool holder. Verify nominal shank size, clean mating surfaces, exact holder/nut fit and proper tightening procedure before running the machine.
Technical Specifications
ER40 Collet
- Royce Ayr
- Precision ER40 ER Collet
- ER40-30
- Precision Tool Holding & Clamping
- ER40
- 1.1811 in (30 mm)
- DIN 6388
- Special 30 mm variant — standard ER40 OAL/OD not assigned
- CNC Router
- Snap collet into nut before threading nut onto tool holder
- 30 mm
- ER40
- CNC Router Toolholding · Precision Tool-Shank Clamping · Router Bit Holding
- Compatible ER40 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Best Fit Applications
CNC Router Toolholding
Precision Tool-Shank Clamping
Router Bit Holding
Drill & Boring Tool Holding
ER40 Toolholder / Nut Systems
Product Highlights
DIN 6388 · ER40
Royce identifies ER collets as DIN 6388-conforming toolholding; this page keeps the 30 mm special separate from standard ER40 envelope assumptions.
Correct Nut Installation
Royce specifies snapping the collet into the nut before threading the nut onto the tool holder.
Compatibility & Installation Notes
Use only with a compatible ER40 toolholder and collet nut specifically able to accept this 30 mm variant. Confirm exact holder/nut fit and nominal shank size before clamping. Keep all mating surfaces clean and snap the collet into the nut before threading the nut onto the holder.
Precision ER40 Toolholding
Royce Ayr ER40-30 provides a 30 mm nominal tool-shank ER40 collet while deliberately avoiding unsupported standard-envelope dimensions for this special size.
Correct holder-family matching, clean seating, proper nut assembly and appropriate tightening are essential to concentric clamping and reliable CNC-router tool retention.