Holder fit
Match the ER32 family to the holder and nut.
Royce Ayr ER32 Precision Collet – 5/16" Tool Shank – DIN 6388
CA$35.00
In stock
SKU
ER32-5/16
Product Type
Precision ER32 ER Collet
Collet Series
ER32
Nominal Tool Shank
5/16 in (7.9375 mm)
Standard
DIN 6388
Overall Length
1.57 in (40 mm)
Outside Diameter
1.30 in (33 mm)
Machine Type
CNC Router
Installation
Snap collet into nut before threading nut onto tool holder
ER32 Collet
Royce Ayr
Precision ER32 Collet
ER32 tool clamping for matching holders and cylindrical tool shanks.
5/16 inNominal Tool Shank
ER32Collet Series
40 mmCollet Overall Length
ER32 Collet
Tool holding for a matching collet, nut and holder assembly.
ER325/16 inSKU ER32-5/16
Use with a compatible ER32 holder and nut. Confirm the clamping size for your tool shank.
Main Product Description
This ER32 collet holds a cylindrical tool shank in a compatible toolholder. This version is sized for a 5/16 in shank.
Choose the collet family to match both the holder and its nut, then select the correct clamping size for the tool. Similar-looking collets are not necessarily interchangeable.
Clean the collet, nut and holder seats before assembly. Follow the holder manufacturer’s assembly and tightening instructions, and replace a collet that is worn or damaged.
Technical Specifications
ER32 Collet
- Precision ER32 ER Collet
- ER32-5/16
- Precision Tool Holding & Clamping
- ER32
- 5/16 in (7.9375 mm)
- 1.57 in (40 mm)
- 1.30 in (33 mm)
- CNC Router
- Snap collet into nut before threading nut onto tool holder
- 5/16 in
- Compatible ER32 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Best Fit Applications
CNC Router Toolholding
Precision Tool-Shank Clamping
Router Bit Holding
Drill & Boring Tool Holding
ER32 Toolholder / Nut Systems
Product Highlights
Shank selection
Choose the clamping size for the cylindrical tool shank.
Clean seating
Keep the mating surfaces clean and replace worn or damaged collets.
Compatibility & Installation Notes
Confirm the collet family and tool-shank size before ordering. Follow the holder manufacturer’s assembly and tightening instructions.
ER32 Collet
This Royce Ayr ER32 collet holds a cylindrical tool shank in a compatible toolholder. This version is sized for a 5/16 in shank.
Choose the collet family to match both the holder and its nut, then select the correct clamping size for the tool. Similar-looking collets are not necessarily interchangeable.
Clean the collet, nut and holder seats before assembly. Follow the holder manufacturer’s assembly and tightening instructions, and replace a collet that is worn or damaged.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.