18-Piece ER32 Set
Provides eighteen ER32 collets while avoiding an unverified claim about the exact included nominal-size assortment.
Royce Ayr ER32 Precision Collet Set – 18 Pieces – DIN 6388
CA$999.99
Out of stock
SKU
ER32-18KIT
Product Type
ER32 Precision Collet Set
Piece Count
18
Collet Series
ER32
Standard
DIN 6388
Individual Collet OAL
1.57 in (40 mm)
Individual Collet OD
1.30 in (33 mm)
Set Assortment
18 collets — individual size assortment not stated in verified source
Machine Type
CNC Router
Installation
Snap collet into nut before threading nut onto tool holder
ER32 18-Piece
Collet Set
ER32 Precision Collet Set
Royce Ayr ER32-18KIT is an 18-piece ER32 precision-collet set for CNC-router toolholding. Royce states its ER collets conform to DIN 6388 and should be snapped into the nut before the nut is threaded onto the tool holder. The exact 18-piece size assortment is not stated in the verified Titan or Royce source, so no unverified range is assigned.
18 pcsSet Count
ER32Collet Series
40 mmIndividual Collet OAL
DIN 6388Royce Standard
ER32 Precision Collet Set
Eighteen ER32 precision collets for compatible ER32 toolholders and collet nuts; exact included nominal-size assortment is intentionally left unspecified unless verified.
18 PiecesER32DIN 6388SKU ER32-18KIT
Compatible ER32 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Main Product Description
The Royce Ayr ER32-18KIT is a precision ER32 collet set containing 18 collets for CNC-router toolholding and compatible ER32 clamping systems.
Royce identifies ER collets as DIN 6388-conforming tooling and instructs users to snap the collet into the nut before threading the nut onto the holder. ER32 family identification geometry is 40 mm overall length and 33 mm outside diameter per individual collet.
The verified source does not state the exact 18-piece assortment. This page therefore does not claim a metric or inch size range that has not been confirmed.
Technical Specifications
ER32 Collet
- Royce Ayr
- ER32 Precision Collet Set
- ER32-18KIT
- Precision Tool Holding & Clamping
- 18
- ER32
- DIN 6388
- 1.57 in (40 mm)
- 1.30 in (33 mm)
- 18 collets — exact nominal-size assortment not verified
- CNC Router
- Snap collet into nut before threading nut onto tool holder
- CNC Router Toolholding · Precision Tool-Shank Clamping · Router Bit Holding
- Compatible ER32 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Best Fit Applications
CNC Router Toolholding
Precision Tool-Shank Clamping
Router Bit Holding
Drill & Boring Tool Holding
ER32 Toolholder / Nut Systems
Product Highlights
DIN 6388 ER32 Platform
Royce identifies its ER collets as DIN 6388-conforming; ER32 family geometry is 40 mm OAL by 33 mm OD.
Correct Nut Installation
Royce specifies that the collet should be snapped into the nut before the nut is threaded onto the tool holder.
Compatibility & Installation Notes
Use only with compatible ER32 toolholders and ER32 collet nuts. Confirm each selected collet matches the tool-shank diameter. Keep the collet, nut and holder taper clean, and snap the collet into the nut before threading the nut onto the holder. Do not assume the kit contains any specific size until the physical set or packaging is verified.
18-Piece ER32 Toolholding
Royce Ayr ER32-18KIT provides an 18-piece ER32 precision-collet package for compatible CNC-router toolholding systems.
DIN 6388 family identification, proper collet-to-nut assembly and correct nominal shank matching are essential to repeatable tool retention and concentric clamping.