14 mm Nominal Size
ER32-14 is the 14 mm nominal tool-shank variant for the ER32 collet family.
Royce Ayr ER32 Precision Collet – 14mm Tool Shank – DIN 6388
CA$999.99
Out of stock
SKU
ER32-14
Product Type
Precision ER32 ER Collet
Collet Series
ER32
Nominal Tool Shank
0.5512 in (14 mm)
Standard
DIN 6388
Overall Length
1.57 in (40 mm)
Outside Diameter
1.30 in (33 mm)
Machine Type
CNC Router
Installation
Snap collet into nut before threading nut onto tool holder
Precision ER32
Collet
Precision ER32 Collet
Royce Ayr ER32-14 is a 14 mm precision ER32 collet for securely clamping compatible round tool shanks in ER32 toolholding systems. Royce states its collets conform to DIN 6388 and should be snapped into the nut before the nut is threaded onto the tool holder.
14 mmNominal Tool Shank
ER32Collet Series
40 mmCollet Overall Length
DIN 6388Collet Standard
Precision ER32 Collet
14 mm nominal tool-shank collet for compatible ER32 holders and nuts, with family identification dimensions of 40 mm OAL and 33 mm OD.
ER32DIN 638814 mmSKU ER32-14
Compatible ER32 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Main Product Description
The Royce Ayr ER32-14 is a precision ER32 collet sized for a 14 mm round tool shank. It is intended for compatible CNC-router toolholders and collet nuts using the ER32 system.
Royce states its collets conform to DIN 6388. The ER32 family-identification envelope is 40 mm overall length and 33 mm outside diameter.
For installation, snap the collet into the nut first, then thread the nut onto the tool holder. Verify nominal shank size, clean mating surfaces, correct holder/nut family and proper tightening procedure before running the machine.
Technical Specifications
ER32 Collet
- Royce Ayr
- Precision ER32 ER Collet
- ER32-14
- Precision Tool Holding & Clamping
- ER32
- 0.5512 in (14 mm)
- DIN 6388
- 1.57 in (40 mm)
- 1.30 in (33 mm)
- CNC Router
- Snap collet into nut before threading nut onto tool holder
- 14 mm
- CNC Router Toolholding · Precision Tool-Shank Clamping · Router Bit Holding
- Compatible ER32 toolholders and collet nuts. Verify the holder/nut family and nominal tool-shank size before installation.
Best Fit Applications
CNC Router Toolholding
Precision Tool-Shank Clamping
Router Bit Holding
Drill & Boring Tool Holding
ER32 Toolholder / Nut Systems
Product Highlights
DIN 6388 · ER32
The ER32 family envelope is 40 mm OAL by 33 mm OD, supporting positive collet-family identification.
Correct Nut Installation
Royce specifies snapping the collet into the nut before threading the nut onto the tool holder.
Compatibility & Installation Notes
Use only with compatible ER32 toolholders and collet nuts. Confirm the nominal 14 mm tool-shank size before clamping. Keep the collet, nut and holder mating surfaces clean; snap the collet into the nut before threading the nut onto the holder; and do not mix collet families that may appear visually similar.
Precision ER32 Toolholding
Royce Ayr ER32-14 combines a 14 mm nominal tool-shank size with the verified ER32 family envelope and DIN 6388 toolholding standard.
Correct holder-family matching, clean seating, proper nut assembly and appropriate tightening are essential to concentric clamping and reliable CNC-router tool retention.