Working geometry
The locating point helps position the hole before the cutting edges reach the surface.
Royce Ayr D108.020L – Brad-Point Drill – 2 mm Diameter – Left Hand
CA$44.25
In stock
SKU
D108.020L
Product Type
Brad-Point Drill
Tool Material
Solid Carbide
Cutting Diameter
2 mm (0.07874 in)
Overall Length
70 mm (2.755906 in)
Rotation
Left Hand
Brad-Point Drill
Royce Ayr
D108.020L
Designed to bore holes for dowels and joinery.
2 mm (0.07874 in)Cutting Diameter
70 mm (2.755906 in)Overall Length
Brad-Point DrillTool Type
Left HandRotation
Brad-Point Drill
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Solid CarbideLeft HandSKU D108.020L
Match the tool interface and configuration to the original assembly.
Main Product Description
This Royce Ayr brad-point drill is designed to bore holes for dowels and joinery. It is suitable for particleboard, MDF and solid wood.
The locating point helps position the hole before the cutting edges reach the surface. Set the drilling depth to suit the joint and the thickness of the workpiece. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The cutting diameter is 2 mm. This is a left-hand tool; it must be used with the matching spindle rotation.
Technical Specifications
D108.020L · Brad-Point Drill
- Royce Ayr
- D108.020L
- Brad-Point Drill
- D108
- Solid Carbide
- 2 mm (0.07874 in)
- 70 mm (2.755906 in)
- Left Hand
Tool Configuration
blind-hole drilling
dowel-hole drilling
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The cutting diameter is 2 mm. This is a left-hand tool; it must be used with the matching spindle rotation.
Compatibility & Installation Notes
Confirm tool holding, clearance and cutting conditions for your machine and workpiece before use. Confirm shank size and holder compatibility with Titan.
Brad-Point Drill
Royce Ayr D108.020L is designed to bore holes for dowels and joinery. It is suitable for particleboard, MDF and solid wood.
The locating point helps position the hole before the cutting edges reach the surface. Set the drilling depth to suit the joint and the thickness of the workpiece. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The cutting diameter is 2 mm. This is a left-hand tool; it must be used with the matching spindle rotation. Match the tool interface and configuration to the original assembly.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.