Royce Ayr 2-Flute Chipbreaker Compression Router Bit — 1/2 in (12.7 mm)
2-Flute Chipbreaker Compression
Router Bit
Uncoated HW solid-carbide right-hand 2-flute chipbreaker compression router bit designed for CNC routing of laminated, veneered, plywood, and wood-composite panels where top and bottom edge quality are critical. Its 1/2-inch cutting diameter, 1-5/8-inch cutting edge, 0.715-inch upcut section, matching 1/2-inch shank, and 4-inch overall length suit cabinet, casegoods, nested-routing, and production panel-processing applications.
Main Product Description
The Royce Ayr 2-Flute Chipbreaker Compression Router Bit R60-11006 is designed for CNC routing of laminated or veneered wood and wood-composite materials. Its compression cutting geometry combines upward and downward shearing action to help reduce chipping on both panel faces, making it suitable where clean top and bottom edges are required.
The chipbreaker design helps limit furring and tearout in plywood cores while promoting controlled chip formation. The 1/2-inch cutting diameter, 1-5/8-inch cutting edge, 0.715-inch upcut length, matching 1/2-inch shank, and 4-inch overall length provide a compact production format for cabinet parts, casegoods, nested-based routing, and panel processing.
This uncoated HW solid-carbide tool uses two flutes and right-hand rotation. Proper performance depends on matching the tool to the CNC router, collet condition, tool projection, material construction, panel thickness, cutting depth, feed speed, spindle RPM, hold-down method, and chip-extraction system. RPM/feed data and country of origin are not specified by the supplied source.
Best Fit Applications
Product Highlights
Compression Face Control
The compression geometry combines upward and downward shearing action to help reduce chipping on both panel faces.
Chipbreaker Core Performance
The chipbreaker design helps limit plywood-core furring and tearout while supporting controlled chip formation.
1/2-Inch Production Format
The 1/2-inch diameter and shank, 1-5/8-inch cutting edge, and 4-inch overall length suit production CNC panel work.
Compatibility & Installation Notes
Confirm that the CNC router spindle, collet, and toolholder accept an exact 1/2-inch (12.7 mm) shank and support right-hand rotation. Verify collet condition, runout, tool projection, available clearance, programmed depth, panel thickness, upcut engagement, feed speed, RPM, vacuum hold-down, spoilboard condition, guarding, and dust extraction before production. Compression tools must engage the material correctly so the transition between upcut and downcut sections remains within the panel thickness and produces the intended top-and-bottom edge quality.
Improve Panel Edge Quality
The Royce Ayr 2-Flute Chipbreaker Compression Router Bit R60-11006 provides an uncoated HW solid-carbide solution for CNC panel routing where clean top and bottom edges and controlled plywood-core machining matter.
Its 1/2-inch cutting diameter, 1-5/8-inch cutting edge, 0.715-inch upcut section, matching shank, two-flute compression geometry, right-hand rotation, and 4-inch overall length support cabinet, casegoods, and nested-panel production when correctly held and operated.