Pizzi Pivot for 180 mm Hand-Held Glue Spreader Roller
Roller Pivot
For 180 mm Hand-Held Spreaders
Pizzi code 0180P is the legacy width-specific pivot or roller pin for Pizzi 180 mm / 7.09 in hand-held glue spreaders. It supports the roller assembly and is separate from both the internal and outer rollers.
Main Product Description
Pizzi Roller Pivot code 0180P is the legacy pivot or roller-pin part specified for compatible hand-held glue spreaders with a 180 mm / 7.09 in roller format.
This component provides the pivot point for the spreader’s roller assembly. It is not the internal roller or the rubber, sponge, or EPDM/PUR application roller.
Historical Pizzi documentation identifies 0072P, 0120P, 0150P, and 0180P as separate width-specific pivots. Current catalogues distinguish Ø19 mm and Ø22 mm roller pins.
Best Fit Applications
Product Highlights
Exact 180 mm System Fit
Legacy code 0180P is identified specifically for the 180 mm / 7.09 in Pizzi hand-held spreader format.
Roller Pivot Component
The pin provides the pivot point for the roller assembly and is separate from the internal and outer application rollers.
Legacy-to-Current Identification
Historical code 0180P is documented for the 180 mm width, while current Pizzi listings divide pins by both width and diameter.
Compatibility & Installation Notes
Confirm code 0180P, the 180 mm spreader width, and the required pin diameter before ordering. Current Pizzi references list separate Ø19 mm and Ø22 mm pin families, so do not substitute solely by width. The complete spreader, internal roller, outer application roller, lever, knobs, stand, basin, and adhesive are not represented as included.
Match the Pivot by Width and Pin Diameter
Pizzi code 0180P is the legacy roller pivot for compatible 180 mm / 7.09 in hand-held glue spreaders.
Verify the existing assembly before replacing it because current 180 mm Pizzi pins are separated into Ø19 mm and Ø22 mm configurations.