Exact 14×18 Interface
for the MATATAKITOYO 14×18 interchangeable-head system.
Matatakitoyo TG75 14×18 Hook Head Fitting for MIT-150F
CA$80.00
In stock
SKU
TTW-150F-TG75-TIP
Product Type
14×18 Hook Head Torque Handle Fitting
Series
OZ / TG / MLC Torque Handle Fittings
Fitting Interface
14×18 mm
Collet System
TG75
Clamping Range
50.0±5 mm
H / B
7.0 / 5 mm
L / L1
90.8 / 58.9 mm
L2 / L3
133.7 / 10.6 mm
TG75 14×18
HOOK HEAD
14×18 Hook Head Torque Handle Fitting
Titan part TTW-150F-TG75-TIP is MATATAKITOYO TG75 for the 14×18 hook-head application. The manufacturer row publishes 50.0±5 mm clamping range.
14×18 mmFitting Interface
TG75Collet System
50.0±5 mmClamping Range
39.8Head Diameter D
14×18 Hook Head Torque Handle Fitting
Passive interchangeable hook-head fitting for controlled collet-chuck tightening with a compatible torque handle.
MATATAKITOYO14×18 mmTG75SKU TTW-150F-TG75-TIP
Use only with a compatible MATATAKITOYO 14×18 torque handle and verify the exact TG75 collet-nut geometry before applying torque.
Main Product Description
Titan part TTW-150F-TG75-TIP is MATATAKITOYO TG75 for the 14×18 hook-head application. The manufacturer row publishes 50.0±5 mm clamping range.
Dimensions include H/B 7.0 / 5 mm, L/L1 90.8 / 58.9 mm, L2/L3 133.7 / 10.6 mm, and D/r 39.8 / 27.0 mm.
This is a passive interchangeable fitting. Torque range and calibration accuracy are not assigned to the fitting itself and must be taken from the compatible handle.
Technical Specifications
14×18 Hook Head Torque Handle Fitting · TTW-150F-TG75-TIP
- Matatakitoyo Tool Co., Ltd.
- 14×18 Hook Head Torque Handle Fitting
- TTW-150F-TG75-TIP
- OZ / TG / MLC Torque Handle Fittings
- TG75
- 14×18 mm
- TG75
- 50.0±5 mm
- 7.0 / 5 mm
- 90.8 / 58.9 mm
- 133.7 / 10.6 mm
- 39.8 / 27.0 mm
- TG75 Collet-Chuck Tightening · CNC Toolholder Setup · Controlled Collet-Nut Torque
- Use only with a compatible MATATAKITOYO 14×18 torque handle and verify the exact TG75 collet-nut geometry before applying torque.
Best Fit Applications
TG75 Collet-Chuck Tightening
CNC Toolholder Setup
Controlled Collet-Nut Torque
Machine Tooling Service
Interchangeable Torque Handles
Product Highlights
TG75 Hook-Head Geometry
The manufacturer row retains 50.0±5 mm clamping range and its published dimensional set.
Passive Fitting — No Torque Range
Torque range and accuracy remain properties of the compatible handle, not the fitting.
Compatibility & Installation Notes
Use only with a compatible MATATAKITOYO 14×18 torque handle and verify the exact TG75 collet-nut geometry before applying torque. Match the handle, fitting and fastener as a complete assembly. Do not substitute a neighboring MATATAKITOYO model or fitting solely because the physical appearance is similar.
TG75 Hook-Head Configuration
Titan part TTW-150F-TG75-TIP is MATATAKITOYO TG75 for the 14×18 hook-head application. The manufacturer row publishes 50.0±5 mm clamping range. Dimensions include H/B 7.0 / 5 mm, L/L1 90.8 / 58.9 mm, L2/L3 133.7 / 10.6 mm, and D/r 39.8 / 27.0 mm. This is a passive interchangeable fitting. Torque range and calibration accuracy are not assigned to the fitting itself and must be taken from the compatible handle.
Match the drive, head or engagement profile to the fastener or clamping nut. Use the correct fitting for the assembly and maintain full engagement while applying force.
Follow the assembly’s tightening specification. A separate fitting takes its working torque from the compatible handle and assembly limits. For help selecting a replacement, send Titan the machine model, existing part number and a photo of its connection or mounting.