2-Flute Downcut Geometry
The exact family uses 2-flute downcut spiral geometry with a 30° helix.
Mastercut Two-Flute Downcut Fishtail Router 10mm × 35mm
CA$49.18
In stock
SKU
904-210
Product Type
Two-Flute Downcut Spiral – Plunge Fishtail
Product Family
Two-Flute Downcut Spiral – Plunge Fishtail
Unit Type
Metric
Diameter
10 mm
Length of Cut
35 mm
Shank / Overall
10 mm shank · 76 mm overall
Cutting Material
Solid Carbide
Coating
Uncoated
DOWNCUT SPIRAL ROUTER
2 FLUTE · 30° HELIX
Two-Flute Downcut Spiral – Plunge Fishtail
Mastercut 904-210 is the exact metric two-flute downcut solid-carbide router with 10 mm cutting diameter, 35 mm length of cut, 10 mm shank, 76 mm overall length, plunge-fishtail end, 30° helix, left-hand spiral / right-hand cut geometry, and General Wood application.
10 mmCutting Diameter
35 mmLength of Cut
2 FluteCutting Geometry
UncoatedCoating
Two-Flute Downcut Spiral – Plunge Fishtail
Exact Mastercut configuration verified against the manufacturer family/product record and Titan's exact SKU source.
Solid Carbide2 FluteMetricSKU 904-210
Verify the 10 mm shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use.
Main Product Description
Mastercut 904-210 is the exact two-flute downcut spiral – plunge fishtail item with 10 mm cutting diameter, 35 mm length of cut, 10 mm shank diameter, and 76 mm overall length.
The manufacturer identifies this family with 2 flutes, a 30° helix, and plunge fishtail · 30° helix · left-hand spiral / right-hand cut. The published application group for this exact row is General Wood Milling / Downcut Routing / Plunge Cutting / Top-Surface Finishing / Two-Flute Fishtail Routing.
The active cutting construction is verified as solid carbide. The exact SKU, dimensions, cut direction, application column, and coating state must remain tied together rather than being borrowed from a neighboring Mastercut row.
Technical Specifications
Two-Flute Downcut Spiral – Plunge Fishtail · 904-210
- Mastercut Tool Corp.
- Two-Flute Downcut Spiral – Plunge Fishtail
- 904-210
- Two-Flute Downcut Spiral – Plunge Fishtail
- Metric
- Uncoated
- 10 mm
- 35 mm
- 10 mm
- 76 mm
- 2
- Plunge Fishtail · 30° helix · left-hand spiral / right-hand cut
- Construction: Solid Carbide · Application Group: General Wood Milling / Downcut Routing
- Verify the 10 mm shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use.
Best Fit Applications
General Wood Milling
Downcut Routing
Plunge Cutting
Top-Surface Finishing
Two-Flute Fishtail Routing
Product Highlights
Solid-Carbide Construction
The cutting tool is verified as solid carbide and routes to Titan's approved solid-carbide material image.
Exact Application Row
Mastercut lists this configuration for General Wood Milling / Downcut Routing / Plunge Cutting / Top-Surface Finishing / Two-Flute Fishtail Routing; dimensions alone are not used to substitute another application family.
Compatibility & Installation Notes
Verify the 10 mm shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use. Confirm the exact SKU, dimensions, geometry, coating designation, workholding, tool projection, and manufacturer/machine operating limits. Do not substitute a nearby Mastercut row merely because one or more dimensions match.
Exact Downcut Spiral Configuration
Mastercut 904-210 combines 10 mm diameter, 35 mm length of cut, 10 mm shank, 76 mm overall length, 2 flutes, and downcut spiral geometry.
The exact SKU, coating state, dimensions, geometry, and General Wood Milling / Downcut Routing / Plunge Cutting / Top-Surface Finishing / Two-Flute Fishtail Routing application group are preserved as one verified configuration.