Three-Flute 30° Upcut
The official 813-0 family uses three-flute upcut spiral geometry with a 30° helix and endmill end.
Mastercut Three-Flute Upcut Spiral Router 1/2" × 1-1/2" LOC – PN
CA$53.02
Out of stock
SKU
813-010-5
Product Type
Three-Flute Solid-Carbide Upcut Spiral Router
Product Family
Three-Flute Upcut Spiral – Endmill End
Unit Type
Fractional
Diameter
1/2 in
Length of Cut
1-1/2 in
Shank / Overall
1/2 in shank · 3-1/2 in overall
Cutting Material
Solid Carbide
Coating
PN · Titan source designation
THREE-FLUTE UPCUT ROUTER
30° HELIX · PN DESIGNATION
Three-Flute Solid-Carbide Upcut Spiral Router
Mastercut 813-010-5 is the exact Titan-supplied Mastercut SKU tied to the 813-010 three-flute upcut base geometry: 1/2 in diameter, 1-1/2 in length of cut, 1/2 in shank, 3-1/2 in overall length, endmill end and 30° helix. The submitted coating designation is retained as PN without expanding it beyond the supplied evidence.
1/2 inCutting Diameter
1-1/2 inLength of Cut
3 FluteCutting Geometry
PN · Titan source designationCoating
Three-Flute Solid-Carbide Upcut Spiral Router
Exact Mastercut configuration verified against the manufacturer family/product record and Titan's exact SKU source.
Solid Carbide3 FluteFractionalSKU 813-010-5
Verify SKU 813-010-5, the 1/2-inch shank, PN coating designation, required projection, holder condition, machine limits, and workpiece material before use.
Main Product Description
Mastercut 813-010-5 is preserved as the exact Titan-supplied Mastercut SKU. The current Mastercut 813-0 family table verifies the 813-010 base row at 1/2-inch diameter, 1-1/2-inch length of cut, 1/2-inch shank, and 3-1/2-inch overall length.
The official 813-0 family is a three-flute upcut spiral with an endmill end and 30° helix for General Wood and Hard Plastics. Current Mastercut product records for the same 813 family identify solid-carbide construction.
Titan's exact source description carries the suffix -5 and the coating notation PN. This page preserves that designation literally and does not extrapolate a coating name from another Mastercut family.
Technical Specifications
Three-Flute Upcut Spiral – Endmill End · 813-010-5
- Mastercut Tool Corp.
- Three-Flute Solid-Carbide Upcut Spiral Router
- 813-010-5
- Three-Flute Upcut Spiral – Endmill End
- Fractional
- PN · Titan source designation
- 1/2 in
- 1-1/2 in
- 1/2 in
- 3-1/2 in
- 3
- Upcut Spiral · Endmill End · 30° helix
- Construction: Solid Carbide · Application Group: General Wood / Hard Plastics
- Verify SKU 813-010-5, the 1/2-inch shank, PN coating designation, required projection, holder condition, machine limits, and workpiece material before use.
Best Fit Applications
General Wood
Hard Plastics
Upcut Routing
Endmill-End Cutting
Bottom-Surface Finishing
Product Highlights
Verified Base Geometry
The 813-010 base row is 1/2 × 1-1/2 × 1/2 × 3-1/2 inches for General Wood and Hard Plastics.
Suffix Preserved Exactly
The submitted -5 / PN designation is retained without borrowing a coating rule from a different Mastercut family.
Compatibility & Installation Notes
Verify SKU 813-010-5, the 1/2-inch shank, PN coating designation, required projection, holder condition, machine limits, and workpiece material before use. Confirm the exact SKU, dimensions, geometry, coating designation, workholding, tool projection, and manufacturer/machine operating limits. Do not substitute a nearby Mastercut row merely because one or more dimensions match.
Exact 813-010-5 Configuration
Mastercut 813-010-5 retains the verified 813-010 geometry with a three-flute 30° upcut spiral, endmill end, solid-carbide construction, and General Wood / Hard Plastics application group.
The exact -5 suffix and PN designation are preserved from Titan's source record rather than being silently removed or expanded through an unsupported cross-family coating inference.