2-Flute Downcut Geometry
The exact family uses 2-flute downcut spiral geometry with a 30° helix.
Mastercut Two-Flute Downcut Spiral – Endmill End 3/8" × 7/8" LOC
CA$30.30
Out of stock
SKU
805-120
Product Type
Two-Flute Downcut Spiral – Endmill End
Product Family
Two-Flute Downcut Spiral – Endmill End
Unit Type
Fractional
Diameter
3/8 in
Length of Cut
7/8 in
Shank / Overall
3/8 in shank · 2-1/2 in overall
Cutting Material
Solid Carbide
Coating
Uncoated
DOWNCUT SPIRAL ROUTER
2 FLUTE · 30° HELIX
Two-Flute Downcut Spiral – Endmill End
Mastercut 805-120 is the exact uncoated two-flute downcut spiral – endmill end configuration with 3/8 in cutting diameter, 7/8 in length of cut, 3/8 in shank, 2-1/2 in overall length, 2-flute geometry, and a 30° helix for Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing.
3/8 inCutting Diameter
7/8 inLength of Cut
2 FluteCutting Geometry
UncoatedCoating
Two-Flute Downcut Spiral – Endmill End
Exact Mastercut configuration verified against the manufacturer family/product record and Titan's exact SKU source.
Solid Carbide2 FluteFractionalSKU 805-120
Verify the 3/8 in shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use.
Main Product Description
Mastercut 805-120 is the exact two-flute downcut spiral – endmill end item with 3/8 in cutting diameter, 7/8 in length of cut, 3/8 in shank diameter, and 2-1/2 in overall length.
The manufacturer identifies this family with 2 flutes, a 30° helix, and endmill end · 30° helix. The published application group for this exact row is Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing.
The active cutting construction is verified as solid carbide. The exact SKU, dimensions, cut direction, application column, and coating state must remain tied together rather than being borrowed from a neighboring Mastercut row.
Technical Specifications
Two-Flute Downcut Spiral – Endmill End · 805-120
- Mastercut Tool Corp.
- Two-Flute Downcut Spiral – Endmill End
- 805-120
- Two-Flute Downcut Spiral – Endmill End
- Fractional
- Uncoated
- 3/8 in
- 7/8 in
- 3/8 in
- 2-1/2 in
- 2
- Endmill End · 30° helix
- Construction: Solid Carbide · Application Group: Hard Plastics / Aluminum
- Verify the 3/8 in shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use.
Best Fit Applications
Hard Plastics
Aluminum
Downcut Routing
Slotting
Top-Surface Finishing
Product Highlights
Solid-Carbide Construction
The cutting tool is verified as solid carbide and routes to Titan's approved solid-carbide material image.
Exact Application Row
Mastercut lists this configuration for Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing; dimensions alone are not used to substitute another application family.
Compatibility & Installation Notes
Verify the 3/8 in shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use. Confirm the exact SKU, dimensions, geometry, coating designation, workholding, tool projection, and manufacturer/machine operating limits. Do not substitute a nearby Mastercut row merely because one or more dimensions match.
Exact Downcut Spiral Configuration
Mastercut 805-120 combines 3/8 in diameter, 7/8 in length of cut, 3/8 in shank, 2-1/2 in overall length, 2 flutes, and downcut spiral geometry.
The exact SKU, coating state, dimensions, geometry, and Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing application group are preserved as one verified configuration.