2-Flute Downcut Geometry
The exact family uses 2-flute downcut spiral geometry with a 30° helix.
Mastercut Two-Flute Downcut Spiral – Endmill End 1/8" × 1/2" LOC
CA$22.05
Out of stock
SKU
805-102
Product Type
Two-Flute Downcut Spiral – Endmill End
Product Family
Two-Flute Downcut Spiral – Endmill End
Unit Type
Fractional
Diameter
1/8 in
Length of Cut
1/2 in
Shank / Overall
1/4 in shank · 2 in overall
Cutting Material
Solid Carbide · A-Gr-SiV Premium Carbide Blend
Coating
Uncoated
DOWNCUT SPIRAL ROUTER
2 FLUTE · 30° HELIX
Two-Flute Downcut Spiral – Endmill End
Mastercut 805-102 is the exact uncoated two-flute downcut spiral – endmill end configuration with 1/8 in cutting diameter, 1/2 in length of cut, 1/4 in shank, 2 in overall length, 2-flute geometry, and a 30° helix for Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing.
1/8 inCutting Diameter
1/2 inLength of Cut
2 FluteCutting Geometry
UncoatedCoating
Two-Flute Downcut Spiral – Endmill End
Exact Mastercut configuration verified against the manufacturer family/product record and Titan's exact SKU source.
Solid Carbide2 FluteFractionalSKU 805-102
Verify the 1/4 in shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use.
Main Product Description
Mastercut 805-102 is the exact two-flute downcut spiral – endmill end item with 1/8 in cutting diameter, 1/2 in length of cut, 1/4 in shank diameter, and 2 in overall length.
The manufacturer identifies this family with 2 flutes, a 30° helix, and endmill end · 30° helix. The published application group for this exact row is Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing.
The active cutting construction is verified as solid carbide · a-gr-siv premium carbide blend. The exact SKU, dimensions, cut direction, application column, and coating state must remain tied together rather than being borrowed from a neighboring Mastercut row.
Technical Specifications
Two-Flute Downcut Spiral – Endmill End · 805-102
- Mastercut Tool Corp.
- Two-Flute Downcut Spiral – Endmill End
- 805-102
- Two-Flute Downcut Spiral – Endmill End
- Fractional
- Uncoated
- 1/8 in
- 1/2 in
- 1/4 in
- 2 in
- 2
- Endmill End · 30° helix
- Construction: Solid Carbide · A-Gr-SiV Premium Carbide Blend · Application Group: Hard Plastics / Aluminum
- Verify the 1/4 in shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use.
Best Fit Applications
Hard Plastics
Aluminum
Downcut Routing
Slotting
Top-Surface Finishing
Product Highlights
Solid-Carbide Construction
The cutting tool is verified as solid carbide · a-gr-siv premium carbide blend and routes to Titan's approved solid-carbide material image.
Exact Application Row
Mastercut lists this configuration for Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing; dimensions alone are not used to substitute another application family.
Compatibility & Installation Notes
Verify the 1/4 in shank, downcut geometry, required cutting length, holder condition, machine limits, and exact workpiece material before use. Confirm the exact SKU, dimensions, geometry, coating designation, workholding, tool projection, and manufacturer/machine operating limits. Do not substitute a nearby Mastercut row merely because one or more dimensions match.
Exact Downcut Spiral Configuration
Mastercut 805-102 combines 1/8 in diameter, 1/2 in length of cut, 1/4 in shank, 2 in overall length, 2 flutes, and downcut spiral geometry.
The exact SKU, coating state, dimensions, geometry, and Hard Plastics / Aluminum / Downcut Routing / Slotting / Top-Surface Finishing application group are preserved as one verified configuration.