118° Four-Facet Point
Mastercut identifies the two-flute Series 601 drill geometry as a 118° four-facet point.
Mastercut 2-Flute Solid Carbide Drill 5/16" × 2-3/8" LOC
CA$36.02
Out of stock
SKU
601-232
Product Type
Two-Flute Solid-Carbide Jobber Drill
Product Family
Series 601 Solid Carbide Jobber Drill
Unit Type
Fractional
Diameter
5/16 in
Length of Cut
2-3/8 in
Shank / Overall
5/16 in shank · 4 in overall
Cutting Material
Solid Carbide
Coating
Uncoated
SOLID-CARBIDE JOBBER DRILL
2 FLUTE · 118° FOUR-FACET
Two-Flute Solid-Carbide Jobber Drill
Mastercut 601-232 is the exact two-flute solid-carbide jobber drill with a 5/16 in cutting diameter, 2-3/8 in cutting length, 5/16 in shank, 4 in overall length, and 118° four-facet drill point.
5/16 inCutting Diameter
2-3/8 inLength of Cut
2 FluteCutting Geometry
UncoatedCoating
Two-Flute Solid-Carbide Jobber Drill
Exact Mastercut configuration verified against the manufacturer family/product record and Titan's exact SKU source.
Solid Carbide2 FluteFractionalSKU 601-232
Verify the 5/16-inch shank, 118° four-facet point requirement, required drilling depth, workpiece material, holder condition, and machine limits before use.
Main Product Description
Mastercut 601-232 is the exact two-flute Series 601 solid-carbide drill. The official manufacturer table lists a 5/16-inch cutting diameter, 2-3/8-inch cutting length, 5/16-inch shank, and 4-inch overall length.
Mastercut identifies the two-flute Series 601 geometry as a 118° four-facet point. The neighboring 601-632 is the three-flute counterpart and is not interchangeable with this SKU.
The manufacturer's drill recommendations cover common aluminum alloys, cast irons, copper alloys, steels, stainless steels, nickel alloys, and titanium materials; machining parameters remain application- and machine-specific.
Technical Specifications
Series 601 Solid Carbide Jobber Drill · 601-232
- Mastercut Tool Corp.
- Two-Flute Solid-Carbide Jobber Drill
- 601-232
- Series 601 Solid Carbide Jobber Drill
- Fractional
- Uncoated
- 5/16 in
- 2-3/8 in
- 5/16 in
- 4 in
- 2
- 118° four-facet drill point
- Construction: Solid Carbide · Drill Point: 118° Four-Facet Point
- Verify the 5/16-inch shank, 118° four-facet point requirement, required drilling depth, workpiece material, holder condition, and machine limits before use.
Best Fit Applications
Aluminum & Alloys
Cast Iron
Brass / Bronze / Copper
Steels & Stainless
Titanium / Nickel Alloys
Product Highlights
Solid-Carbide Construction
The Series 601 jobber drill is identified by Mastercut as solid carbide.
Exact Two-Flute SKU
601-232 is the exact 5/16-inch two-flute row; the three-flute 601-632 is a separate item.
Compatibility & Installation Notes
Verify the 5/16-inch shank, 118° four-facet point requirement, required drilling depth, workpiece material, holder condition, and machine limits before use. Confirm the exact SKU, dimensions, geometry, coating designation, workholding, tool projection, and manufacturer/machine operating limits. Do not substitute a nearby Mastercut row merely because one or more dimensions match.
Verified 5/16-Inch Two-Flute Drill
Mastercut 601-232 combines a 5/16-inch diameter and shank, 2-3/8-inch cutting length, 4-inch overall length, two flutes, and a 118° four-facet point.
Exact SKU selection must retain the two-flute 601-232 identity and must not substitute the three-flute or coated counterpart.