90° Combined Operation
Drilling and countersinking are combined in one exact 90° Series 600 configuration.
Mastercut 90° Drill & Countersink 1/8" × 5/16" Shank
CA$36.04
Out of stock
SKU
600-210
Product Type
Solid-Carbide Drill &Countersink
Product Family
Series 600 Drill &Countersink
Unit Type
Fractional
Diameter
1/8 in
Length of Cut
1/8 in
Shank / Overall
5/16 in shank · 2-1/8 in overall
Cutting Material
Solid Carbide · A-Gr-SiV Premium Carbide Blend
Coating
Uncoated
DRILL & COUNTERSINK
90° · 118° POINT
Solid-Carbide Drill & Countersink
Mastercut 600-210 is the exact uncoated fractional drill-and-countersink configuration with a 1/8 in cutting diameter, 1/8 in cutting length, 5/16 in shank, 2-1/8 in overall length, two-flute geometry, a 118° drill point, and a 90° countersink.
1/8 inCutting Diameter
1/8 inLength of Cut
2 FluteCutting Geometry
UncoatedCoating
Solid-Carbide Drill & Countersink
Exact Mastercut configuration verified against the manufacturer family/product record and Titan's exact SKU source.
Solid Carbide2 FluteFractionalSKU 600-210
Verify the 5/16-inch shank, 90° countersink requirement, workpiece material, toolholder condition, spindle limits, and machine setup before use.
Main Product Description
Mastercut 600-210 is the exact 90° uncoated Series 600 drill-and-countersink item. The manufacturer lists a 1/8-inch cutting diameter and cutting length, 5/16-inch shank, and 2-1/8-inch overall length.
The Series 600 family combines a two-flute 118° drill point with an integrated countersink. The exact 600-210 column is the 90° countersink configuration; adjacent 60° and 82° part numbers are separate products.
The current Mastercut product record identifies solid-carbide A-Gr-SiV construction and lists metalworking material groups including steels, stainless, non-ferrous materials, cast iron, titanium, cermet, and hardened materials.
Technical Specifications
Series 600 Drill & Countersink · 600-210
- Mastercut Tool Corp.
- Solid-Carbide Drill & Countersink
- 600-210
- Series 600 Drill & Countersink
- Fractional
- Uncoated
- 1/8 in
- 1/8 in
- 5/16 in
- 2-1/8 in
- 2
- 118° four-facet drill point · 90° countersink
- Construction: Solid Carbide · A-Gr-SiV Premium Carbide Blend · Countersink Angle: 90° · Drill Point: 118°
- Verify the 5/16-inch shank, 90° countersink requirement, workpiece material, toolholder condition, spindle limits, and machine setup before use.
Best Fit Applications
Steel
Stainless Steel
Non-Ferrous Metals
Cast Iron
Titanium / Hardened Materials
Product Highlights
118° Two-Flute Point
The official Series 600 data identifies a two-flute 118° drill point for this uncoated item.
Exact 600-210 Identity
The 90° part number must remain distinct from same-size 60° and 82° variants and coated suffix versions.
Compatibility & Installation Notes
Verify the 5/16-inch shank, 90° countersink requirement, workpiece material, toolholder condition, spindle limits, and machine setup before use. Confirm the exact SKU, dimensions, geometry, coating designation, workholding, tool projection, and manufacturer/machine operating limits. Do not substitute a nearby Mastercut row merely because one or more dimensions match.
Exact 90° Drill & Countersink Configuration
Mastercut 600-210 combines 1/8-inch diameter and cutting length, a 5/16-inch shank, 2-1/8-inch overall length, two flutes, a 118° drill point, and a 90° countersink.
Selection must preserve the exact 600-210 angle and uncoated state rather than substituting neighboring Series 600 countersink-angle or coating variants.