Working geometry
Upcut and downcut sections work toward the middle of the material.
Sistemi Klein T356.128.RMKD – KleinDIA Solid-Carbide Mortise-Compression Router Bit – 1/2 in Diameter
CA$453.75
In stock
SKU
T356.128.RMKD
Product Class
Router Bit
Product Type
KleinDIA Solid-Carbide Mortise-Compression Router Bit
Cutting Diameter
1/2 in
Cutting Length
1-1/4 in
Shank Diameter
1/2 in
Overall Length
3 in
Upcut Length
0.200 in (5.08 mm)
Tool Material
Solid Carbide
Flutes
3
Hand
Right Hand
Cut Direction
Compression
Coating
KleinDIA
KleinDIA Solid-Carbide Mortise-Compression Router Bit
Sistemi Klein
T356.128.RMKD
Designed to route panel edges with opposing cutting directions.
1/2 inCutting Diameter
1-1/4 inCutting Length
1/2 inShank Diameter
KleinDIA Solid-Carbide Mortise-Compression Router BitProduct Type
KleinDIA Solid-Carbide Mortise-Compression Router Bit
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Solid CarbideSKU T356.128.RMKD
Choose a holder or collet for the 1/2 in shank and check the available tool clearance.
Main Product Description
This Sistemi Klein KleinDIA solid-carbide mortise-compression router bit is designed to route panel edges with opposing cutting directions. It is suitable for softwood, hardwood, chipboard, MDF, plywood, double-sided melamine, laminated panels, plastic-coated panels and solid-surface materials.
Upcut and downcut sections work toward the middle of the material. With the transition positioned within the panel, the geometry helps support both faces during the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/2 in cutting diameter and 1-1/4 in cutting length define the working section of this version. Its 1/2 in shank fits a holder or collet matched to that diameter. The upcut section is 0.200 in long; position the transition within the material.
Technical Specifications
T356.128.RMKD · KleinDIA Solid-Carbide Mortise-Compression Router Bit
- Sistemi Klein
- T356.128.RMKD
- Router Bit
- KleinDIA Solid-Carbide Mortise-Compression Router Bit
- T356
- 1/2 in
- 1-1/4 in
- 1/2 in
- 3 in
- 0.200 in (5.08 mm)
- Solid Carbide
- 3
- Right Hand
- Compression
- KleinDIA
- 3+3
Tool Configuration
mortising
grooving
routing
dado cutting
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 1/2 in cutting diameter and 1-1/4 in cutting length define the working section of this version. Its 1/2 in shank fits a holder or collet matched to that diameter. The upcut section is 0.200 in long; position the transition within the material.
Compatibility & Installation Notes
The manufacturer gives the short upcut section as 0.200 inch, with 5 mm as a nominal metric label. Use the tool marking and machine instructions for allowable speed, clamping and cutting depth.
KleinDIA Solid-Carbide Mortise-Compression Router Bit
Sistemi Klein T356.128.RMKD is designed to route panel edges with opposing cutting directions. It is suitable for softwood, hardwood, chipboard, MDF, plywood, double-sided melamine, laminated panels, plastic-coated panels and solid-surface materials.
Upcut and downcut sections work toward the middle of the material. With the transition positioned within the panel, the geometry helps support both faces during the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/2 in cutting diameter and 1-1/4 in cutting length define the working section of this version. Its 1/2 in shank fits a holder or collet matched to that diameter. The upcut section is 0.200 in long; position the transition within the material.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.