Working geometry
The cutter follows the connector system’s prescribed path to form the pocket and its retaining shape.
Sistemi Klein T169.098.RKD – KleinDIA Solid-Carbide Lamello P-System Cutter – 9.8 mm Diameter
CA$298.75
In stock
SKU
T169.098.RKD
Product Class
Router Bit
Product Type
KleinDIA Solid-Carbide Lamello P-System Cutter
Cutting Diameter
9.8 mm
Cutting Length
23 mm
Shank Diameter
12 mm
Overall Length
80 mm
Tool Material
Solid Carbide
Flutes
2
Hand
Right Hand
Coating
KleinDIA
Connector System
Lamello P-System
KleinDIA Solid-Carbide Lamello P-System Cutter
Sistemi Klein
T169.098.RKD
Designed to machine the shaped pockets used for compatible P-System connectors.
9.8 mmCutting Diameter
23 mmCutting Length
12 mmShank Diameter
KleinDIA Solid-Carbide Lamello P-System CutterProduct Type
KleinDIA Solid-Carbide Lamello P-System Cutter
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Solid CarbideSKU T169.098.RKD
Choose a holder or collet for the 12 mm shank and check the available tool clearance.
Main Product Description
This Sistemi Klein KleinDIA solid-carbide Lamello P-System cutter is designed to machine the shaped pockets used for compatible P-System connectors.
The cutter follows the connector system’s prescribed path to form the pocket and its retaining shape. Use the correct toolpath for the connector, rather than a straight plunge. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 9.8 mm cutting diameter and 23 mm cutting length define the working section of this version. Its 12 mm shank fits a holder or collet matched to that diameter.
Technical Specifications
T169.098.RKD · KleinDIA Solid-Carbide Lamello P-System Cutter
- Sistemi Klein
- T169.098.RKD
- Router Bit
- KleinDIA Solid-Carbide Lamello P-System Cutter
- T169
- 9.8 mm
- 23 mm
- 12 mm
- 80 mm
- Solid Carbide
- 2
- Right Hand
- KleinDIA
- Lamello P-System
Tool Configuration
Lamello P-System groove machining
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 9.8 mm cutting diameter and 23 mm cutting length define the working section of this version. Its 12 mm shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
Use the tool marking and machine instructions for allowable speed, clamping and cutting depth.
KleinDIA Solid-Carbide Lamello P-System Cutter
Sistemi Klein T169.098.RKD is designed to machine the shaped pockets used for compatible P-System connectors.
The cutter follows the connector system’s prescribed path to form the pocket and its retaining shape. Use the correct toolpath for the connector, rather than a straight plunge. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 9.8 mm cutting diameter and 23 mm cutting length define the working section of this version. Its 12 mm shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.