EXTRA TIME Z2 Geometry
Two-flute geometry with rounded spurs and a reinforced centre point is specified by Klein for excellent finish and longer tool life.
Klein Carbide Dowel Drill EXTRA TIME 2-Tooth – 5mm Diameter – 35mm Cut – 10×30mm Shank – 70mm Overall Length – Left-Hand
CA$999.99
Out of stock
SKU
L115.050.L
Product Type
HW Dowel Drill EXTRA TIME Z=2
Family
Klein L115
Diameter
D=5 mm
Cutting Length
B=35 mm
Shank
S=10×30 mm
Total Length
L=70 mm
Rotation
LH / Left Hand
Material / Coating
Special HW / Carbide · PTFE-Based
Application
Automatic Dowel Drilling in Wood &Panel Materials
HW Dowel Drill EXTRA TIME
Z2
Klein / SISTEMI
Left-hand Klein EXTRA TIME HW dowel drill engineered for clean, repeatable boring in natural wood, pressed wood, veneered panels, chipboard, laminate, MDF, and compatible melamine or Trespa panels. The verified L115.050.L configuration uses a 5 mm diameter, 35 mm cutting length, 10×30 mm shank, 70 mm total length, and Z2 geometry.
D=5 mmCutting Diameter
B=35 mmCutting Length
S=10×30 mmShank
L=70 mmTotal Length
HW Dowel Drill EXTRA TIME
Two-flute EXTRA TIME drilling geometry with rounded spurs and a reinforced centre point. Klein specifies Special HW cutting material, excellent finish, longer tool life, and PTFE-based coating for improved chip flow.
Special HWZ2 / Two FlutesPTFE CoatedSKU L115.050.L
For compatible automatic drilling machines using a 10×30 mm shank interface and left-hand rotation. The shank design includes an adjusting screw for controlled height setup.
Main Product Description
The Klein L115.050.L is an HW Dowel Drill EXTRA TIME Z2 from the L114-L115 family. SISTEMI Klein's current official table verifies S=10×30 mm, D=5 mm, B=35 mm, L=70 mm, and left-hand rotation for this exact SKU.
Klein specifies two flutes, rounded spurs, a reinforced centre point, Special HW cutting material, excellent finish, longer tool life, and a PTFE-based coating intended to improve chip flow. The family is suitable for natural wood, pressed wood, veneered boards, chipboard, laminate, MDF, and is also suggested for Trespa and melamine panels.
The shank design includes an adjusting screw and is intended for compatible automatic drilling machines. Confirm left-hand spindle rotation, toolholder fit, screw adjustment, runout, drilling depth, feed speed, RPM, extraction, and workpiece support before production.
Technical Specifications
EXTRA TIME Dowel Drill L115.050.L
- Klein
- HW Dowel Drill EXTRA TIME Z=2
- L115.050.L
- EXTRA TIME HW Drilling Tooling
- L115
- Special HW / Carbide
- PTFE-Based
- 10×30 mm
- 5 mm
- 35 mm
- 70 mm
- LH / Left Hand
- Flutes: 2 / Z2 · Geometry: Rounded Spurs + Reinforced Centre Point · Adjustment: Shank Adjusting Screw Included · Machinery: Automatic Drilling Machines · Materials: Natural Wood, Pressed Wood, Veneered Boards, Chipboard, Laminate, MDF, Trespa and Melamine
- For compatible automatic drilling machines using a 10×30 mm shank interface and left-hand rotation. The shank design includes an adjusting screw for controlled height setup.
Best Fit Applications
MDF & Chipboard Drilling
Natural & Pressed Wood
Veneered Panels
Laminate & Melamine
Automatic Drilling Machines
Product Highlights
PTFE-Based Chip Flow Coating
The PTFE-based coating is specified to improve chip flow while the underlying Special HW cutting material remains the active carbide cutting edge.
5 mm Left-Hand Configuration
The exact L115.050.L configuration is 5 mm diameter, 35 mm cutting length, 10×30 mm shank, 70 mm total length, with LH rotation.
Compatibility & Installation Notes
Confirm that the automatic drilling spindle accepts the exact 10×30 mm shank and requires left-hand rotation before installing L115.050.L. Verify the adjusting screw setting, tool seating, runout, drilling depth, feed speed, RPM, extraction, and workpiece support before production. A special screw for Weeke machines is available separately from Klein when required.
Precision 5 mm Left-Hand Dowel Drilling
Klein L115.050.L combines a 5 mm cutting diameter, 35 mm cutting length, 10×30 mm shank, 70 mm total length, left-hand rotation, Z2 geometry, Special HW cutting material, and a PTFE-based coating.
Rounded spurs and a reinforced centre point support clean boring across wood and panel materials, while the adjusting-screw shank design supports repeatable setup in compatible automatic drilling machines.