This Klein right-hand dowel drill is designed for accurate 5 mm boring in cabinetmaking, millwork, furniture, and panel-processing applications. Marked Ø5 x 105-HW-RH with a 10 x 27 mm shank and Z=2 cutting geometry, this drill is built for clean, repeatable hole production on compatible boring machines and CNC machining centres.
Ø5 mmDrill Diameter
L=105 mmLength Marking
S=10x27 mmShank
Z=2Cutting Geometry
Main Product Description
Right-Hand 5 mm Dowel Drilling for Cabinet and Panel Production
This Klein dowel drill is made for woodworking and panel-processing shops that require accurate 5 mm hole drilling. The tool is marked Ø5 x 105-HW-RH, indicating a 5 mm drill diameter, 105 mm length, HW cutting construction, and right-hand rotation.
This dowel drill is suited for drilling dowel holes, cabinet assembly holes, construction holes, and production boring patterns in MDF, particleboard, plywood, melamine, laminated panels, hardwood, softwood, and other compatible wood-based materials. The Z=2 cutting geometry supports controlled boring performance, while the S=10x27 shank marking identifies the required 10 mm shank connection with 27 mm clamping length.
This is a right-hand rotation drill and must be installed in a compatible RH boring spindle or CNC drilling unit. It is a practical choice for cabinet shops, closet manufacturers, furniture plants, and millwork operations that rely on consistent 5 mm drilling for production assembly.
This drill is a dependable RH dowel drilling solution for daily production use in cabinet, closet, furniture, millwork, and panel-processing environments.
Best Fit Applications
Built for Clean 5 mm Drilling in Woodworking and Panel Processing
Use this Klein right-hand dowel drill for accurate 5 mm drilling in compatible boring machines and CNC machining centres.
5 mm dowel drilling
Cabinet assembly holes
Furniture construction holes
CNC boring and drilling operations
Line-boring and production drilling patterns requiring 5 mm holes
Compatible boring machines using RH drilling spindles
CNC machining centres using RH drilling units
Cabinet, closet, furniture, and millwork production
01
Accurate 5 mm Boring
The Ø5 mm diameter is suited for repeatable dowel holes, cabinet assembly holes, and production boring patterns.
02
RH Production Setup
Right-hand rotation supports compatible RH boring spindles and CNC drilling units used in panel-processing environments.
03
Controlled Cutting Geometry
The S=10x27 mm shank marking and Z=2 geometry support stable, repeatable drilling in compatible machine setups.
!
Compatibility Notes
This is a right-hand rotation drill and should only be used in machines, boring heads, or CNC drilling units configured for RH rotation. Confirm machine compatibility, collet size, shank size, maximum RPM, material type, boring depth, feed rate, safe tool clearance, and proper tool seating before use.
Verify drill diameter, shank size, rotation direction, boring depth, tool length, spindle compatibility, feed speed, RPM, and material suitability. Do not substitute this drill for a left-hand version unless the machine manufacturer confirms compatibility.
Product Page Copy Block
Right-Hand 5 mm Dowel Drilling for Cabinet and Panel Production
This Klein dowel drill is designed for accurate 5 mm boring in professional woodworking, cabinetmaking, furniture, and panel-processing environments. With a Ø5 x 105 mm drill size, HW cutting construction, right-hand rotation, 10 x 27 mm shank, and Z=2 cutting geometry, this tool supports clean, repeatable drilling on compatible CNC machining centres and boring machines.
This drill is well suited for cabinet assembly, dowel construction, line-boring patterns, furniture production, and general panel drilling in MDF, particleboard, plywood, melamine, laminated board, hardwood, softwood, and other compatible materials. Made in Italy by Klein / SISTEMI, it gives production shops a dependable RH dowel drilling solution for daily use.
