Working geometry
The point geometry is intended for the tool’s drilling operation.
JSO 140° Boring Bit — 5 mm, LH
CA$59.77
In stock
SKU
30559-6-05036-L
Product Class
Boring Bit
Product Type
140° Roof-Point Boring Bit
Cutting Diameter (D)
5 mm
Cutting Length / Useful Length
36 mm
Shank Diameter
10 mm
Overall Length
70 mm
Shank Length
24 mm
Point Projection
.9 mm
Cutting Material
Solid Carbide
Rotation
Left
Point Angle (degrees)
140
Cutting Section
solid-carbide spiral section
140° Roof-Point Boring Bit
JSO
30559-6-05036-L
Designed to drill through holes.
5 mmCutting Diameter (D)
36 mmCutting Length / Useful Length
10 mmShank Diameter
70 mmOverall Length
140° Roof-Point Boring Bit
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Boring BitSKU 30559-6-05036-L
Choose a holder or collet for the 10 mm shank and check the available tool clearance.
Main Product Description
This JSO 140° roof-point boring bit is designed to drill through holes. It is suitable for HPL, plywood, laminated chipboard, MDF, solid wood and plastics.
The point geometry is intended for the tool’s drilling operation. Support the exit side of the workpiece and set the drilling depth for the required breakthrough. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 5 mm cutting diameter and 36 mm cutting length define the working section of this version. Its 10 mm shank fits a holder or collet matched to that diameter. This is a left-hand tool; it must be used with the matching spindle rotation.
Technical Specifications
30559-6-05036-L · 140° Roof-Point Boring Bit
- JSO
- 30559-6-05036-L
- Boring Bit
- 140° Roof-Point Boring Bit
- 30559
- 30559-6-05036-L
- 5 mm
- 36 mm
- 10 mm
- 70 mm
- 24 mm
- .9 mm
- Solid Carbide
- Left
- 140
- solid-carbide spiral section
- clamping flat
- M5 × 8 mm
- HPL, plywood, laminated chipboard, MDF, solid wood, plastics
Tool Configuration
through-hole drilling in nesting operations
blind-hole drilling
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 5 mm cutting diameter and 36 mm cutting length define the working section of this version. Its 10 mm shank fits a holder or collet matched to that diameter. This is a left-hand tool; it must be used with the matching spindle rotation.
Compatibility & Installation Notes
Match the part number, mounting dimensions and machine configuration before use. Follow the tool and machine manufacturer’s operating instructions.
140° Roof-Point Boring Bit
JSO 30559-6-05036-L is designed to drill through holes. It is suitable for HPL, plywood, laminated chipboard, MDF, solid wood and plastics.
The point geometry is intended for the tool’s drilling operation. Support the exit side of the workpiece and set the drilling depth for the required breakthrough. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 5 mm cutting diameter and 36 mm cutting length define the working section of this version. Its 10 mm shank fits a holder or collet matched to that diameter. This is a left-hand tool; it must be used with the matching spindle rotation.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.