Working geometry
The groove creates a controlled fold line.
JSO 91° Insert Folding Cutter — 50 mm, 3/4 in Shank
CA$314.13
In stock
SKU
22180-5-50004-R
Product Class
Router Bit
Product Type
Insert Bevel and Folding Cutter
Cutting Diameter (D)
50 mm
Shank Diameter
3/4 in
Overall Length
93 mm
Sloped Cutting-Edge Length (L2)
36.4 mm
Axial Profile Height (L3)
25 mm
Cutting Material
Replaceable Carbide Inserts
Flutes
1
Rotation
Right
Included Angle (degrees)
91
Maximum RPM (family rating)
18000
Insert Bevel and Folding Cutter
JSO
22180-5-50004-R
Designed to route folding grooves.
50 mmCutting Diameter (D)
3/4 inShank Diameter
93 mmOverall Length
36.4 mmSloped Cutting-Edge Length (L2)
Insert Bevel and Folding Cutter
Replaceable carbide inserts let you renew the cutting edges while keeping the tool body in service.
Router BitSKU 22180-5-50004-R
Choose a holder or collet for the 3/4 in shank and check the available tool clearance.
Main Product Description
This JSO insert bevel and folding cutter is designed to route folding grooves. It is suitable for wood-based panels.
The groove creates a controlled fold line. Set the groove depth for the required remaining material at the bottom of the fold. Replaceable carbide inserts let you renew the cutting edges while keeping the tool body in service.
The cutting diameter is 50 mm. Its 3/4 in shank fits a holder or collet matched to that diameter.
Technical Specifications
22180-5-50004-R · Insert Bevel and Folding Cutter
- JSO
- 22180-5-50004-R
- Router Bit
- Insert Bevel and Folding Cutter
- 22180
- 22180-5-50004-R
- 50 mm
- 3/4 in
- 93 mm
- 36.4 mm
- 25 mm
- 55 mm
- Replaceable Carbide Inserts
- 1
- Right
- 91
- 18000
- HW 02
- 72015-6-04015-R, HW 02, 40 × 12 × 1.5 mm
- 39076-0-04040-R, M4 × 4, Torx T15
- M8
- wood-based panels
Tool Configuration
bevel cutting
decorative grooving
folding grooves
Product Highlights
Cutting material
Replaceable carbide inserts let you renew the cutting edges while keeping the tool body in service.
This version
The cutting diameter is 50 mm. Its 3/4 in shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
L2 is the sloped cutting-edge length; L3 is the axial profile height. Check the complete cutter profile for the intended groove. Match the part number, mounting dimensions and machine configuration before use. Follow the tool and machine manufacturer’s operating instructions.
Insert Bevel and Folding Cutter
JSO 22180-5-50004-R is designed to route folding grooves. It is suitable for wood-based panels.
The groove creates a controlled fold line. Set the groove depth for the required remaining material at the bottom of the fold. Replaceable carbide inserts let you renew the cutting edges while keeping the tool body in service.
The cutting diameter is 50 mm. Its 3/4 in shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.