Working geometry
The interrupted cutting geometry breaks the cut into smaller sections.
JSO JSO-XD Roughing Cutter — 16 mm × 51 mm
CA$271.67
In stock
SKU
20269-6-16000-R
Product Class
Router Bit
Product Type
JSO-XD Roughing Cutter
Cutting Diameter (D)
16 mm
Cutting Length / Useful Length
51 mm
Shank Diameter
16 mm
Overall Length
120 mm
Cutting Material
Solid Carbide
Flutes
2
Cut Direction
Upcut
Rotation
Right
Point Angle (degrees)
80
Edge Profile
roughing chipbreaker
JSO-XD Roughing Cutter
JSO
20269-6-16000-R
Designed to remove stock before finishing.
16 mmCutting Diameter (D)
51 mmCutting Length / Useful Length
16 mmShank Diameter
120 mmOverall Length
JSO-XD Roughing Cutter
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Router BitSKU 20269-6-16000-R
Choose a holder or collet for the 16 mm shank and check the available tool clearance.
Main Product Description
This JSO JSO-XD roughing cutter is designed to remove stock before finishing. It is suitable for solid wood and wood-based panels.
The interrupted cutting geometry breaks the cut into smaller sections. Use it for stock removal and allow a separate finishing pass when the final edge requires one. The upcut spiral lifts chips out of the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 16 mm cutting diameter and 51 mm cutting length define the working section of this version. Its 16 mm shank fits a holder or collet matched to that diameter.
Technical Specifications
20269-6-16000-R · JSO-XD Roughing Cutter
- JSO
- 20269-6-16000-R
- Router Bit
- JSO-XD Roughing Cutter
- 20269
- 20269-6-16000-R
- 16 mm
- 51 mm
- 16 mm
- 120 mm
- 9 mm
- Solid Carbide
- 2
- Upcut
- Right
- JSO-XD
- 80
- roughing chipbreaker
- solid wood, wood-based panels
Tool Configuration
routing lock cases and keyholes
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 16 mm cutting diameter and 51 mm cutting length define the working section of this version. Its 16 mm shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
Match the part number, mounting dimensions and machine configuration before use. Follow the tool and machine manufacturer’s operating instructions.
JSO-XD Roughing Cutter
JSO 20269-6-16000-R is designed to remove stock before finishing. It is suitable for solid wood and wood-based panels.
The interrupted cutting geometry breaks the cut into smaller sections. Use it for stock removal and allow a separate finishing pass when the final edge requires one. The upcut spiral lifts chips out of the cut. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 16 mm cutting diameter and 51 mm cutting length define the working section of this version. Its 16 mm shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.