Compression Z2+6 Geometry
The verified positive/negative Z2+6 arrangement identifies this exact X99 configuration as a compression-style nesting tool.
ITA Tools nexCut PLATINUM Solid Carbide Compression Router Bit 1/2". × 1-1/2". 2-Tooth+6 Right-Hand
CA$189.00
Out of stock
SKU
X99.13.381.889.13PR
Product Type
nexCut Platinum solid-carbide compression router bit
Series
X99 nexCut PLATINUM
Cutting Diameter
1/2 in. (12.70 mm)
Working Length
1-1/2 in. (38.10 mm)
Compression Edge
5.8 mm (approximately 15/64 in.)
Overall Length
3-1/2 in. (88.90 mm)
Shank
1/2 in. (12.70 mm)
Cutting Geometry
Z2+6 · positive/negative · RH
X99 nexCut
Z2+6 Platinum
Compression Router
ITA TOOLS catalogue index X99.13.381.889.13PR is a right-hand nexCut PLATINUM VHM solid-carbide compression router bit with a 1/2 in. (12.70 mm) cutting diameter, 1-1/2 in. (38.10 mm) working length, 5.8 mm (approximately 15/64 in.) compression edge, 3-1/2 in. (88.90 mm) overall length, 1/2 in. (12.70 mm) shank, Z2+6 positive/negative geometry, and Platinum coating.
1/2 in.Cutting Diameter
1-1/2 in.Working Length
Z2+6Compression Geometry
PlatinumCoating
nexCut Platinum Compression Router Bit
An X99 nexCut PLATINUM VHM compression router bit for verified nesting, cutting, and jointing work in MDF, particleboard, plywood, laminated materials, solid wood, and HPL.
ITA TOOLSX99 NEXCUTRH · Z2+6X99.13.381.889.13PR
Confirm the 1/2-inch shank, required clamping length, RH rotation, holder rating, machine limits, and exact workpiece material before use. The official catalogue index must remain unchanged.
Main Product Description
ITA TOOLS X99.13.381.889.13PR is the exact X99 nexCut PLATINUM VHM solid-carbide compression router bit. Its verified dimensions are a 1/2 in. (12.70 mm) cutting diameter, 1-1/2 in. (38.10 mm) working length, and 5.8 mm (approximately 15/64 in.) compression edge.
The verified configuration has a 3-1/2 in. (88.90 mm) overall length, 1/2 in. (12.70 mm) shank, right-hand rotation, Z2+6 positive/negative compression geometry, and Platinum coating.
The published family applications include nesting, cutting, and jointing in raw MDF, particleboard, plywood, laminated materials, solid wood, and HPL.
Technical Specifications
X99 nexCut PLATINUM · X99.13.381.889.13PR
- ITA TOOLS
- Coated Solid-Carbide Compression Router Bit
- X99.13.381.889.13PR
- X99 nexCut PLATINUM
- VHM / Solid Carbide
- 1/2 in. (12.70 mm)
- 1-1/2 in. (38.10 mm)
- 5.8 mm (approximately 15/64 in.)
- 3-1/2 in. (88.90 mm)
- 1/2 in. (12.70 mm)
- Z2+6 · Positive / Negative Compression
- RH · Platinum
- Raw MDF, Particleboard, Plywood, Laminated Materials, Solid Wood and HPL
- Confirm the 1/2-inch shank, required clamping length, RH rotation, holder rating, machine limits, and exact workpiece material before use. The official catalogue index must remain unchanged.
Best Fit Applications
Raw MDF Nesting
Particleboard Nesting
Plywood Routing
Laminated Panel Routing
Solid Wood and HPL Routing
Product Highlights
VHM with Platinum Coating
The exact product construction is VHM solid carbide with Platinum coating and is routed to Titan’s approved solid-carbide material image.
Exact Imperial Configuration
The catalogue configuration combines a 1/2-inch diameter, 1-1/2-inch working length, 5.8 mm compression edge, 3-1/2-inch overall length, and 1/2-inch shank.
Compatibility & Selection Notes
Verify the exact catalogue index X99.13.381.889.13PR, 1/2-inch shank, required clamping length, RH rotation, holder compatibility, machine limits, and workpiece material before selection. Do not derive spindle speed, feed speed, chip load, depth of cut, or toolpath settings from the catalogue index. Follow the machine, holder, and official ITA TOOLS documentation.
Exact X99 nexCut Platinum Configuration
ITA TOOLS catalogue index X99.13.381.889.13PR identifies the exact 1/2-inch X99 nexCut PLATINUM solid-carbide compression router bit with a 1-1/2-inch working length, Z2+6 positive/negative geometry, Platinum coating, and right-hand rotation.
The catalogue index, family, dimensions, rotation, cutting material, coating, geometry, and published applications must remain separate from neighbouring X99 variants.