Working geometry
The angled cutting profile forms a bevel along the edge of the workpiece.
ITA Tools PCD Chamfer Router Bit — 12.7 mm dia
CA$365.00
In stock
SKU
FDH.12.009.06.5SR
Product Class
Router Bit
Product Type
PCD Chamfer Router Bit
Cutting Diameter (D)
12.7 mm
Cutting Length (I)
9.2 mm
Shank Diameter
6.35 mm
Overall Length (L)
55 mm
Flat Tip Width (D1)
2.29 mm
Shank Length
40 mm
PCD Height (H)
4 mm
Cutting Material
PCD
Flutes
2
Rotation
right
PCD Chamfer Router Bit
ITA Tools
FDH.12.009.06.5SR
Designed to cut bevelled edges.
12.7 mmCutting Diameter (D)
9.2 mmCutting Length (I)
6.35 mmShank Diameter
55 mmOverall Length (L)
PCD Chamfer Router Bit
Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
Router BitSKU FDH.12.009.06.5SR
Choose a holder or collet for the 6.35 mm shank and check the available tool clearance.
Main Product Description
This ITA Tools PCD chamfer router bit is designed to cut bevelled edges.
The angled cutting profile forms a bevel along the edge of the workpiece. Set the cutter position for the required bevel width. Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
The 12.7 mm cutting diameter and 9.2 mm cutting length define the working section of this version. Its 6.35 mm shank fits a holder or collet matched to that diameter.
Technical Specifications
FDH.12.009.06.5SR · PCD Chamfer Router Bit
- ITA Tools
- FDH.12.009.06.5SR
- Router Bit
- PCD Chamfer Router Bit
- FDH
- FDH.12.009.06.5SR
- 12.7 mm
- 9.2 mm
- 6.35 mm
- 55 mm
- 2.29 mm
- 40 mm
- 4 mm
- PCD
- 2
- right
- steel
- 45
Product Configuration
chamfer routing
Product Highlights
Cutting material
Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
This version
The 12.7 mm cutting diameter and 9.2 mm cutting length define the working section of this version. Its 6.35 mm shank fits a holder or collet matched to that diameter.
Compatibility & Selection Notes
45° is the manufacturer’s chamfer angle, not an asserted included V-angle. Follow the tool and machine manufacturer’s installation and operating instructions.
PCD Chamfer Router Bit
ITA Tools FDH.12.009.06.5SR is designed to cut bevelled edges.
The angled cutting profile forms a bevel along the edge of the workpiece. Set the cutter position for the required bevel width. Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
The 12.7 mm cutting diameter and 9.2 mm cutting length define the working section of this version. Its 6.35 mm shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.