FS Tool Family Geometry
High-tensile steel cutter body with no shear
FS Tool V-Groove Insert Router Bit — 45° × 1.574"
CA$999.99
In stock
SKU
563-V45.030
Product Type
V-Groove Insert Router Bit
FS Tool Family
RD2571 · V-Groove Insert Router Bits
Angle
45°
Cutting Diameter
1.574 in
Shank
1/2 in
Cutting Edges
1
Cutting Material
Tungsten-Carbide Insert Tooling
Catalogue Reference
FC79–FC80
V-Groove Insert Router Bit
FS Tool
RD2571
FS Tool industrial woodworking/CNC tooling mapped to the verified RD2571 · V-Groove Insert Router Bits catalogue family. Store SKU 563-V45.030 is retained as the commerce identifier.
45°Angle
1.574 inCutting Diameter
1/2 inShank
Tungsten-Carbide Insert ToolingCutting Material
V-Groove Insert Router Bit
FS Tool catalogue-family data is used for construction, cutting material, application and system behavior; the existing Titan SKU remains the store key.
Tungsten-Carbide Insert ToolingFC79–FC80FS Custom / Internal SKUSKU 563-V45.030
Confirm the exact custom/store dimensions, shank or machine interface, rotation where applicable, and tooling setup before installation. Do not substitute a neighbouring standard catalogue size merely because the family is the same.
Main Product Description
FS Tool 563-V45.030 is represented as a v-groove insert router bit within the RD2571 · V-Groove Insert Router Bits catalogue family. The Titan commerce SKU is preserved for store continuity while the customer-facing manufacturer is FS Tool.
FS Tool recommends a 44.5° angle of cut (91° included angle) for glue folds to allow for the addition of glue.
Catalogue design: High-tensile steel cutter body with no shear; Precise center point on the bottom; Suitable for ramp-in plunge cuts or side entry.
Technical Specifications
RD2571 · V-Groove Insert Router Bits
- FS Tool
- V-Groove Insert Router Bit
- 563-V45.030
- V-Groove Insert Router Bits
- RD2571 · V-Groove Insert Router Bits
- FC79–FC80 · PDF 429–430
- Tungsten-Carbide Insert Tooling
- 45°
- 1.574 in
- 1/2 in
- 1
- 45°
- Chamfering · Bevels · Decorative Grooving
- Confirm the exact custom/store dimensions, shank or machine interface, rotation where applicable, and tooling setup before installation. Do not substitute a neighbouring standard catalogue size merely because the family is the same.
Best Fit Applications
Chamfering
Bevels
Decorative Grooving
Mitre Folds
Stationary & CNC Routers
Product Highlights
Cutting-System Design
Precise center point on the bottom
Catalogue Application
Suitable for ramp-in plunge cuts or side entry
Compatibility & Installation Notes
Confirm the exact custom/store dimensions, shank or machine interface, rotation where applicable, and tooling setup before installation. Do not substitute a neighbouring standard catalogue size merely because the family is the same.
FS Tool Production Tooling — Catalogue-Grounded Selection
RD2571 · V-Groove Insert Router Bits catalogue data supplies the verified material, design and application framework for this SKU.
Maintain the existing store SKU with the correct FS Tool family, geometry and setup relationship through purchasing, programming, setup and replacement.