Working geometry
Upcut and downcut sections work toward the middle of the material.
8C0.276 – PCD Compression Router Bit – 1/2 in Diameter
CA$750.00
In stock
SKU
8C0.276
Product Class
Router Bit
Product Type
PCD Compression Router Bit
Cutting Diameter
1/2 in
Cutting Length
30 mm
Tool Material
Pcd
Cut Direction
Compression
Cutting-Edge Arrangement (Z)
3+3
PCD Compression Router Bit
Titan Tooling
8C0.276
Designed to route panel edges with opposing cutting directions.
1/2 inCutting Diameter
30 mmCutting Length
PCD Compression Router BitProduct Type
8C0.276SKU
PCD Compression Router Bit
Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
Router BitSKU 8C0.276
Match the tool interface and configuration to the original assembly.
Main Product Description
This PCD compression router bit is designed to route panel edges with opposing cutting directions.
Upcut and downcut sections work toward the middle of the material. With the transition positioned within the panel, the geometry helps support both faces during the cut. Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
The 1/2 in cutting diameter and 30 mm cutting length define the working section of this version.
Technical Specifications
8C0.276 · PCD Compression Router Bit
- 8C0.276
- Router Bit
- PCD Compression Router Bit
- 1/2 in
- 30 mm
- Pcd
- Compression
- 3+3
Tool Configuration
routing
Product Highlights
Cutting material
Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
This version
The 1/2 in cutting diameter and 30 mm cutting length define the working section of this version.
Compatibility & Installation Notes
For help selecting a replacement, send Titan the original part number, machine model and a photo of the mounting.
PCD Compression Router Bit
8C0.276 is designed to route panel edges with opposing cutting directions.
Upcut and downcut sections work toward the middle of the material. With the transition positioned within the panel, the geometry helps support both faces during the cut. Polycrystalline diamond (PCD) forms the cutting edges, providing high wear resistance at the point of contact.
The 1/2 in cutting diameter and 30 mm cutting length define the working section of this version. Match the tool interface and configuration to the original assembly.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.