Working geometry
The sleeve reduces the holder’s clamping bore to the specified shank size.
ETP Transmission HS Sleeve — 3/4 in to 1/4 in
CA$275.00
In stock
SKU
R1919.06352
Product Class
Adapter
Product Type
HS Reduction Sleeve
Manufacturer Part Number
R1919.06352
Holder Fit Diameter (D2)
3/4 in
Tool Bore Diameter (D1)
1/4 in
Sleeve Diameter D3
25 mm
Sleeve Length (L1)
50 mm
Component Type
reduction sleeve
Runout Specification
< 3 µm, manufacturer sleeve-family specification
Holder Family
ETP HYDRO-GRIP with matching bore; excludes G3
Tool Shank Tolerance
h6 or h7
Cooling Type
HS internal cooling
HS Reduction Sleeve
ETP Transmission
R1919.06352
Designed to fit a smaller tool shank into a compatible hydraulic holder.
3/4 inHolder Fit Diameter (D2)
1/4 inTool Bore Diameter (D1)
25 mmSleeve Diameter D3
50 mmSleeve Length (L1)
HS Reduction Sleeve
The sleeve reduces the holder’s clamping bore to the specified shank size. Use it only with the stated holder family and a matching cylindrical shank.
AdapterSKU R1919.06352
Match the tool interface and configuration to the original assembly.
Main Product Description
This ETP Transmission HS reduction sleeve is designed to fit a smaller tool shank into a compatible hydraulic holder.
The sleeve reduces the holder’s clamping bore to the specified shank size. Use it only with the stated holder family and a matching cylindrical shank.
Use this sleeve in an ETP HYDRO-GRIP holder with a matching bore. It is not for the G3 series.
Technical Specifications
R1919.06352 · HS Reduction Sleeve
- ETP Transmission
- R1919.06352
- Adapter
- HS Reduction Sleeve
- HS Reduction Sleeves
- R1919.06352
- 3/4 in
- 1/4 in
- 25 mm
- 50 mm
- 36 mm
- 4 mm
- reduction sleeve
- < 3 µm, manufacturer sleeve-family specification
- ETP HYDRO-GRIP with matching bore; excludes G3
- h6 or h7
- HS internal cooling
- inch to inch
Product Configuration
adapting an ETP holder bore to a smaller cylindrical tool shank
Product Highlights
Part selection
Match the tool interface and configuration to the original assembly.
This version
Use this sleeve in an ETP HYDRO-GRIP holder with a matching bore. It is not for the G3 series.
Compatibility & Installation Notes
Insert the tool through the sleeve’s full clamping length. Do not clamp an empty reduction sleeve; this can damage it. Match both the holder bore and tool shank diameter. These sleeves are not specified for HYDRO-GRIP G3. Follow the tool and machine manufacturer’s installation and operating instructions.
HS Reduction Sleeve
ETP Transmission R1919.06352 is designed to fit a smaller tool shank into a compatible hydraulic holder.
The sleeve reduces the holder’s clamping bore to the specified shank size. Use it only with the stated holder family and a matching cylindrical shank.
Use this sleeve in an ETP HYDRO-GRIP holder with a matching bore. It is not for the G3 series. Match the tool interface and configuration to the original assembly.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.