Working geometry
The hydraulic clamping system grips the tool shank inside the holder.
ETP Transmission HYDRO-GRIP COMPACT Holder — SK30, 3/4 in
CA$725.00
In stock
SKU
706352
Product Class
Tool Holder
Product Type
HYDRO-GRIP COMPACT Hydraulic Holder
Tool Clamping Diameter (D1)
3/4 in
Holder Gauge Length (L1)
2.756 in
Maximum Tool Insertion Depth
2.047 in
Clamping System
hydraulic
Balance Grade
G 2.5
Balance Reference Speed (rpm)
25000
Runout Specification
≤ 0.004 mm at 2.5 × D1, with a maximum measuring length of 50 mm
Machine Interface
SK30
Tool Shank Tolerance
h6 or h7
Coolant Through
Yes
HYDRO-GRIP COMPACT Hydraulic Holder
ETP Transmission
706352
Designed to clamp cylindrical tool shanks in the machine spindle.
3/4 inTool Clamping Diameter (D1)
1.181 inHolder Body Diameter (D2)
2.047 inHolder Body Diameter (D3)
2.756 inHolder Gauge Length (L1)
HYDRO-GRIP COMPACT Hydraulic Holder
The hydraulic clamping system grips the tool shank inside the holder. It provides a compact connection between the spindle interface and the cutting tool.
Tool HolderSKU 706352
Match the tool interface and configuration to the original assembly.
Main Product Description
This ETP Transmission HYDRO-GRIP COMPACT hydraulic holder is designed to clamp cylindrical tool shanks in the machine spindle.
The hydraulic clamping system grips the tool shank inside the holder. It provides a compact connection between the spindle interface and the cutting tool.
The machine-side interface is SK30. The tool-side clamping size is 3/4 in.
Technical Specifications
706352 · HYDRO-GRIP COMPACT Hydraulic Holder
- ETP Transmission
- 706352
- Tool Holder
- HYDRO-GRIP COMPACT Hydraulic Holder
- HYDRO-GRIP COMPACT
- 706352
- 3/4 in
- 1.181 in
- 2.047 in
- 2.756 in
- 2.004 in
- .433 in
- 2.047 in
- hydraulic
- G 2.5
- 25000
- ≤ 0.004 mm at 2.5 × D1, with a maximum measuring length of 50 mm
- 1.0
- 192–314 ft·lbf
- Sweden
- SK30
- h6 or h7
- Yes
- M8 × 1.25
- 5 mm
Product Configuration
hydraulic clamping of cylindrical tool shanks
Product Highlights
Part selection
Match the tool interface and configuration to the original assembly.
This version
The machine-side interface is SK30. The tool-side clamping size is 3/4 in.
Compatibility & Installation Notes
G 2.5 at 25,000 rpm is the holder balance rating. Follow the permitted speed for the complete tool and spindle assembly. Use the pressure-screw tightening torque marked on the holder. Torque transmission capacity is not the screw-tightening setting. Published minimum torque transmission assumes an h6 cylindrical shank inserted to full depth; confirm the complete setup for the intended load. Follow the tool and machine manufacturer’s installation and operating instructions.
HYDRO-GRIP COMPACT Hydraulic Holder
ETP Transmission 706352 is designed to clamp cylindrical tool shanks in the machine spindle.
The hydraulic clamping system grips the tool shank inside the holder. It provides a compact connection between the spindle interface and the cutting tool.
The machine-side interface is SK30. The tool-side clamping size is 3/4 in. Match the tool interface and configuration to the original assembly.
For help matching this component, send Titan the equipment model and the part number or a photo of the existing assembly.