6 / 3.5 mm Geometry
The current Dimar product record specifies 6 mm diameter and 3.5 mm secondary diameter.
Dimar Solid Carbide Chamfer Engraving Insert – Chamfer – 6mm Diameter – 3.5mm d – 2.3mm Cut
CA$999.99
Out of stock
SKU
3185041
Product Type
Solid Carbide Chamfer Engraving Insert
Diameter
6 mm
Secondary Diameter (d)
3.5 mm
Cutting Length
2.3 mm
Technology
Solid Carbide
Trade
Industrial
Application
Wood, veneers, laminate, composites, solid surface, and plastics
Chamfer 2.3 mm
Engraving Insert
Chamfer Insert
Dimar 3185041 is a 6 mm diameter solid-carbide chamfer insert with 3.5 mm secondary diameter and a 2.3 mm cutting length for the Dimar interchangeable engraving system.
6 mmDiameter
3.5 mmd
2.3 mmCutting Length
Solid CarbideTechnology
Chamfer Insert
Industrial solid-carbide chamfer insert for the Dimar interchangeable engraving system.
Solid Carbide6 mm Diameter2.3 mm CLSKU 3185041
For the Dimar interchangeable engraving system. Confirm the correct arbour, insert seat, retaining screw and machining setup before production.
Main Product Description
Dimar 3185041 is an industrial solid-carbide chamfer insert with a verified 6 mm diameter, 3.5 mm secondary diameter and 2.3 mm cutting length.
The Dimar engraving insert system is engineered for rapid insert interchange while the body remains mounted, helping reduce setup time while maintaining consistent cutting geometry.
Dimar lists the insert for soft wood, hard wood, veneers, laminate, composite material, solid surface and plastic. Correct seating, hardware, runout and cutting parameters remain essential.
Technical Specifications
Chamfer Insert 3185041
- Dimar
- Solid Carbide Chamfer Engraving Insert
- 3185041
- Industrial Woodworking & CNC Tooling
- Industrial
- 6 mm
- 3.5 mm
- 2.3 mm
- Solid Carbide
- Soft Wood, Hard Wood, Veneers, Laminate, Composite Material, Solid Surface, Plastic
- Dimar Interchangeable Engraving Insert System
- 6 mm
- Chamfering · CNC Engraving · Veneer & Laminate
- For the Dimar interchangeable engraving system. Confirm the correct arbour, insert seat, retaining screw and machining setup before production.
Best Fit Applications
Chamfering
CNC Engraving
Veneer & Laminate
Wood & MDF
Plastics & Solid Surface
Product Highlights
2.3 mm Cutting Length
The exact current SKU is controlled by a 2.3 mm cutting length.
Solid-Carbide Construction
The official Technology field is Solid Carbide, driving the Titan carbide image route.
Compatibility & Installation Notes
Confirm SKU 3185041 and the 6 mm / 3.5 mm / 2.3 mm geometry against the correct Dimar engraving-system body and retaining hardware. Verify seat condition, runout, spindle parameters and workholding before cutting.
Controlled Chamfer Geometry
Dimar 3185041 combines 6 mm diameter, 3.5 mm secondary geometry and a 2.3 mm cutting length in a verified solid-carbide chamfer insert.
Exact system matching and correct installation preserve repeatable chamfer geometry and finish quality.