Current Dimar Identity
The current Dimar 60° category lists Tool ID 3185018 at 0.12 mm diameter and 7.5 mm cutting length.
Dimar Solid Carbide V-Groove Engraving Insert – V-Groove 60° – 0.12mm Diameter – 7.5mm Cut
CA$999.99
Out of stock
SKU
3185018
Product Type
Solid Carbide V-Groove Engraving Insert
Diameter
0.12 mm
Cutting Length
7.5 mm
V-Groove Angle
60°
Technology
Solid Carbide
Trade
Industrial
Application
Dimar interchangeable engraving system
V-Groove 60°
Engraving Insert
V-Groove Insert
Dimar 3185018 is a 0.12 mm diameter solid-carbide engraving insert with 60° V-groove geometry and a 7.5 mm cutting length in the Dimar engraving system.
0.12 mmDiameter
7.5 mmCutting Length
60°V-Groove
Solid CarbideTechnology
V-Groove Insert
Solid-carbide 60° engraving insert from Dimar’s interchangeable engraving-system family.
Solid Carbide60° V-Groove7.5 mm CLSKU 3185018
For the Dimar interchangeable engraving system. Confirm the exact body, seat, retaining screw, machine setup and operating parameters before machining.
Main Product Description
Dimar 3185018 is the 0.12 mm diameter member of the manufacturer’s 60° V-groove engraving insert family. Current Dimar product data lists the exact Tool ID with a 7.5 mm cutting length and solid-carbide construction.
The official Dimar catalogue independently corroborates the same 0.12 mm diameter, 7.5 mm cutting length and 60° geometry in the solid-carbide engraving system.
Use the exact insert identity and compatible engraving-system hardware; do not substitute a neighboring 60° insert based only on angle or cutting length.
Technical Specifications
V-Groove Insert 3185018
- Dimar
- Solid Carbide V-Groove Engraving Insert
- 3185018
- Industrial Woodworking & CNC Tooling
- Industrial
- 0.12 mm
- 7.5 mm
- 60°
- Solid Carbide
- Dimar Interchangeable Engraving Insert System
- 0.12 mm
- 7.5 mm
- 60° V-Groove Engraving · Laminated Materials · Veneer & MDF
- For the Dimar interchangeable engraving system. Confirm the exact body, seat, retaining screw, machine setup and operating parameters before machining.
Best Fit Applications
60° V-Groove Engraving
Laminated Materials
Veneer & MDF
Plastics & Composites
Solid-Surface Machining
Product Highlights
60° V-Groove Geometry
The 60-degree profile is verified by both current Dimar product data and the official Dimar catalogue.
Solid-Carbide Construction
The family is explicitly documented as solid carbide, providing the correct carbide material routing.
Compatibility & Installation Notes
Match SKU 3185018 to the correct Dimar engraving-system body and retaining hardware. Verify seating, runout, cutting parameters and workholding before machining.
Verified 60° V-Groove Insert
Dimar 3185018 is a verified 0.12 mm, 7.5 mm cutting-length, 60° solid-carbide engraving insert.
Exact insert identity and correct system setup are essential to repeatable groove geometry and finish quality.