Exact T-Slot Geometry
The official Dimar catalogue fixes the full replacement geometry at 1 3/8 in D, 11/32 in D1, 17/32 in B1 and 1/4 in B2.
Dimar Carbide Tipped T-Slotter Bit – 1-3/8 Diameter – 11/32 D1 – 1/2 Shank – 17/32 B1 – 1/4 B2 – 2-1/2 Overall Length – 2 Flutes
CA$999.99
Out of stock
SKU
145R8-36
Product Type
Carbide Tipped T-Slotter Bit · 2 Flutes
Diameter
1 3/8 in
D1
11/32 in
Shank
1/2 in
B1 / B2
17/32 in / 1/4 in
Overall Length
2 1/2 in
Technology
Carbide Tipped
T-Slotter Carbide Tipped
Router Bit
T-Slotter Bit
Dimar 145R8-36 is a two-flute carbide-tipped T-slotter router bit with a 1 3/8 in cutting diameter, 11/32 in D1, 1/2 in shank, 17/32 in B1, 1/4 in B2 and 2 1/2 in overall length.
1 3/8 inDiameter
1/2 inShank
17/32 inB1
2 FlutesCutters
T-Slotter Bit
Industrial two-flute T-slotting geometry for producing undercut slot profiles in compatible woodworking routing systems.
Carbide Tipped2 Flutes1/2 in ShankSKU 145R8-36
For compatible industrial routing equipment accepting a 1/2 in shank and the specified 1 3/8 in T-slotter geometry. Verify collet, speed, feed, workholding and clearance before cutting.
Main Product Description
Dimar 145R8-36 is an industrial two-flute T-slotter router bit from Dimar’s carbide-bit routing programme. The official Dimar catalogue identifies this exact tool number with a 1 3/8 in diameter, 11/32 in D1, 1/2 in shank, 17/32 in B1, 1/4 in B2 and 2 1/2 in overall length.
The T-slotter geometry forms an undercut slot in wood and wood-based components. The active cutting edge is carbide tipped, providing the wear resistance expected from Dimar industrial router-bit tooling while retaining the steel-bodied T-slotter form.
Use the complete dimensional package when replacing the tool. A similar 1 3/8 in T-slotter with a different D1, B1, B2 or overall length is not an interchangeable match solely because the outside diameter is the same.
Technical Specifications
T-Slotter Bit 145R8-36
- Dimar
- Carbide Tipped T-Slotter Router Bit
- 145R8-36
- Industrial Woodworking & CNC Tooling
- Industrial
- 1 3/8 in
- 11/32 in
- 2
- 1/2 in
- 17/32 in
- 1/4 in
- 2 1/2 in
- Technology: Carbide Tipped
- For compatible industrial routing equipment accepting a 1/2 in shank and the specified 1 3/8 in T-slotter geometry. Verify collet, speed, feed, workholding and clearance before cutting.
Best Fit Applications
T-Slot Grooving
Hardwood Routing
Softwood Routing
Cabinet & Fixture Slots
Industrial Routing
Product Highlights
Two-Flute Cutting
Two cutting flutes provide the specified T-slotter configuration for controlled production routing.
Carbide-Tipped Cutting Edge
Verified carbide-tipped construction routes correctly to Titan’s carbide material panel and must not be confused with PCD tooling.
Compatibility & Installation Notes
Confirm the exact tool number and all listed dimensions before installation. Verify 1/2 in shank fit, collet condition, tool projection, runout, spindle direction, speed, feed, workholding and clearance for the undercut T-slot profile before production.
Controlled T-Slot Geometry
Dimar 145R8-36 combines a 1 3/8 in T-slot profile, two-flute carbide-tipped cutting geometry and a 1/2 in shank in the exact dimensions documented by Dimar.
Correct replacement requires matching D, D1, B1, B2, shank and overall length—not diameter alone.