Amana Tool Solid-Carbide Miter-Fold Replacement Insert Knife, 28 × 12 × 1.5mm
Solid-Carbide Miter-Fold Insert
RC-1100 Replacement Component
Amana Tool RCK-119 is a 28 × 12 × 1.5 mm solid-carbide general-purpose replacement insert for the RC-1100 CNC insert V-groove and miter-fold router bit. The compatible system provides two usable cutting edges through insert rotation and supports miter-fold, signmaking, lettering and panel-fabrication applications.
Main Product Description
Amana Tool RCK-119 is the exact SKU shown on its dedicated official product page in the Solid Carbide General Purpose V-Groove, Miter-Fold and Signmaking Insert CNC Replacement Knives family. The official specification block confirms solid-carbide construction, 28 × 12 × 1.5 mm dimensions and compatibility with Tool No. RC-1100.
The compatible RC-1100 is a 91-degree, single-flute CNC insert V-groove and miter-fold router bit using one RCK-119 general-purpose insert. Amana Tool identifies two usable cutting edges, allowing the insert to be rotated to expose a fresh edge when the first edge reaches the end of its service life.
RCK-119 is designed for aluminum/plastic sandwich materials including ACM, CCM, Alucobond® and Dibond®, with wall-panel fabrication identified as a primary use. Additional officially listed materials include composites, laminate, melamine, MDF/HDF, sign board, solid surface, veneered plywood, wood, foam and high-density urethane.
As a precision replacement component, RCK-119 restores the active solid-carbide cutting edge while retaining the original RC-1100 tool body. The compatible router-bit system supports miter-fold joints, signmaking and lettering and carries a published maximum of 18,000 RPM.
Best Fit Applications
Product Highlights
Exact RC-1100 Fit
The dedicated RCK-119 product page identifies RC-1100 as the exact compatible Amana Tool insert V-groove and miter-fold router bit.
Two Usable Cutting Edges
The compatible tool design allows the solid-carbide insert to be rotated to expose a second cutting edge.
Panel-Fabrication Material Range
Official applications include ACM, CCM, Alucobond®, Dibond®, composites, sign board, solid surface, engineered panels and wood.
Compatibility & Installation Notes
Confirm exact replacement SKU RCK-119, dimensions 28 × 12 × 1.5 mm and compatible Tool No. RC-1100 before service. This SKU supplies the replacement cutting insert only. Cutter service should be completed with the machine isolated from power and according to Amana Tool and machine-manufacturer documentation. Maintain clean, undamaged seating surfaces, verify secure retention and do not invent fastening torque values.
Exact Solid-Carbide Replacement Insert for RC-1100
Amana Tool RCK-119 is a 28 × 12 × 1.5 mm solid-carbide general-purpose replacement insert for the RC-1100 CNC V-groove and miter-fold router bit.
Its two usable cutting edges and verified material range support continued miter-fold, signmaking, lettering and wall-panel fabrication without replacing the complete router-bit body.