Working geometry
The radiused profile shapes the edge into a curve.
Amana Tool Point-Cutting Roundover Router Bit — 1/8 in R
CA$77.00
In stock
SKU
56125
Product Class
Router Bit
Product Type
Point-Cutting Roundover Router Bit
Manufacturer Part Number
56125
Cutting Diameter (D)
1/4 in
Cutting Height (B)
5/16 in
Shank Diameter
1/4 in
Overall Length (L)
2 in
Radius (R)
1/8 in
Tip Width
.020 in
Cutting Material
Solid Carbide
Flutes
1
Point-Cutting Roundover Router Bit
Amana Tool
56125
Designed to round sharp edges.
1/4 inCutting Diameter (D)
5/16 inCutting Height (B)
1/4 inShank Diameter
2 inOverall Length (L)
Point-Cutting Roundover Router Bit
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
Router BitSKU 56125
Choose a holder or collet for the 1/4 in shank and check the available tool clearance.
Main Product Description
This Amana Tool point-cutting roundover router bit is designed to round sharp edges.
The radiused profile shapes the edge into a curve. Cutter height and engagement determine where the curve meets the adjoining faces. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/4 in cutting diameter and 5/16 in cutting length define the working section of this version. Its 1/4 in shank fits a holder or collet matched to that diameter.
Technical Specifications
56125 · Point-Cutting Roundover Router Bit
- Amana Tool
- 56125
- Router Bit
- Point-Cutting Roundover Router Bit
- Amana Tool Point-Cutting Roundover Router Bit
- 56125
- 1/4 in
- 5/16 in
- 1/4 in
- 2 in
- 1/8 in
- .020 in
- Solid Carbide
- 1
Product Configuration
trimming, lettering and fluting
Product Highlights
Cutting material
The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
This version
The 1/4 in cutting diameter and 5/16 in cutting length define the working section of this version. Its 1/4 in shank fits a holder or collet matched to that diameter.
Compatibility & Installation Notes
The fine plunge point is not guaranteed against breakage by the manufacturer. Follow the tool and machine manufacturer’s installation and operating instructions.
Point-Cutting Roundover Router Bit
Amana Tool 56125 is designed to round sharp edges.
The radiused profile shapes the edge into a curve. Cutter height and engagement determine where the curve meets the adjoining faces. The solid-carbide cutting section provides rigidity and wear resistance at the working edge.
The 1/4 in cutting diameter and 5/16 in cutting length define the working section of this version. Its 1/4 in shank fits a holder or collet matched to that diameter.
For help selecting this version, share your machine model, workpiece material and intended operation with Titan.