Fixed chamfer angle
A 22° cutting profile for a consistent bevel geometry.
Insert Carbide Chamfer Bit 22deg 1/4Sk
CA$98.60
Out of stock
SKU
659.023.11
CMT
CMT 22° chamfer router bit with a 1/4 in shank and replaceable carbide knives.
Product Class
Router Bit
Product Type
Insert chamfer bit
Chamfer Angle
22°
Shank Diameter
1/4 in (6.35 mm)
Cutting Material
Carbide inserts
Cutting Edges
2
Rotation
Right-hand
Insert Chamfer Bit
CMT
22° · 1/4 in shank
A defined bevel angle with replaceable carbide cutting knives.
Insert chamfer bitProduct Type
22°Chamfer Angle
1/4 in (6.35 mm)Shank Diameter
Insert Chamfer Bit
CMT 22° chamfer router bit with a 1/4 in shank and replaceable carbide knives.
Insert chamfer bit22°1/4 in (6.35 mm)
Match the 1/4 in shank to the router collet and follow CMT’s setup and insert-replacement instructions. Check the profile on a sample before production.
Main Product Description
This CMT chamfer bit creates a 22° bevel using replaceable carbide knives. Its 1/4 in shank fits a matching router collet, while the fixed cutting angle defines the edge profile.
The two insert knives provide serviceable cutting edges within the tool body. Use the specified replacement knives and fastening hardware when maintaining the cutter, and follow the manufacturer’s seating and tightening instructions.
Match the router setup and workpiece support to the cut. Check the bevel on a sample piece before machining finished components.
Technical Specifications
Insert Chamfer Bit
- 659.023.11
- Router Bit
- Insert chamfer bit
- 22°
- 1/4 in (6.35 mm)
- Carbide inserts
- 2
- Right-hand
Best Fit Applications
22° Chamfers
Bevelled Edges
Matched Router Setups
Product Highlights
Replaceable knives
Carbide insert construction supports planned edge replacement.
1/4 in shank
A defined shank size for a matching router collet.
Compatibility & Installation Notes
Match the 1/4 in shank to the router collet and follow CMT’s setup and insert-replacement instructions. Check the profile on a sample before production.
Insert Chamfer Bit
A CMT insert chamfer bit for a 22° bevel where a 1/4 in shank is required. Replaceable knives let the cutting edges be serviced while retaining the tool body.
Choose the profile angle to suit the finished edge and keep the correct replacement knives and hardware available.